dimosram20 followers

ESP32-2432S028 enclosure for Battery and BMS

136 downloads · 3 years ago · Enclosure for ESP32-2432S028 display You can include a BMS and two batteries to be able to charge it

Description

Enclosure for ESP32-2432S028 display You can include a BMS and two batteries to be able to charge it . Links of Products DISPLAY : https://www.aliexpress.com/item/1005005059421229.html 2 Batteries: https://www.aliexpress.com/item/1005004144678032.html BMS for charging: https://s.click.aliexpress.com/e/_DFIBFRf (You will need only one )

Tags:

Discussions

macandcheese24122 years ago

Very poor design , two of the corner posts are half in air with no bottoms , wall thickness is way to small and results in a very weak part , I tried to clean the model up but it has to maney to fix , horrible design

tuanvu17043 years ago

It seems that BMS is connected directly to the battery and then the output to the Power pin P1/VIN. Pin schematics: https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display/blob/main/PINS.md

bart.olaerts3 years ago

Hi dismoram, I've been playing around with this ESP32-2432S028 board and came across your enclosure design for Battery and BMS. I'm trying to use your design to make a battery powered Home Assistant remote control, but I'm a bit lost on where to attach battery and BMS to the board itself. Could you give me hint or share your soldering work to get this piece of art working? Thanks in advance! Regards, Bart