PC4-M10 PTFE pass through - 45°
6 downloads · 4 years ago · Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5516500.
Model has be
This model is restricted by licensing terms.
View license.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5516500.
Model has been moved to Printables.com:
I have a small workspace, the only way to neatly send the filament to the buffer/printer is through the shelf…
- Drill a 4mm (or a bit more) through the shelf (use 3D piece as a guide can help)
- Join the two pieces, upper and under with the PTFE tube
- Check that filament pass through with minimum resistance
- Screw 3D pieces in place
- Voilà !
Design notes:
- “upper” and "under" have different screw positioning so: Screws can be access via same side of the plank/shelf. Screw will not meet each other inside the wood plank.
- Print without support @0.2mm layer
- Very easy to screw the PC4m10 (from remix)
Hope it helps,
PC4-M10 PTFE pass through - 45°
6 downloads · 4 years ago in and
This model is restricted by licensing terms.
View license.
Filament Feed Guide for 2020 4020 Frame(PC4-M10)
PC4-M10 Retention Clip
HMG7.3 Slice Mosquito-Magnum Screw PC4-M10 Mount V2.stl
HMG7 Slice Copperhead PC4-M10 Cap.stl
HMG7.3 Phaetus Dragon ST-HF-UHF Screw PC4-M10 Mount V4.stl
HMG7.3 Haldis Red Lizard Screw PC4-M10 Mount.stl
PC4-M10 Adapter for Prusa MK3S+ (for 3D Chameleon)
HMG7.3 Phaetus X Voron Dragon ST-HF-UHF PC4-M10 Screw Mount V2.stl
HMG7.3 Phaetus Rapido-Plus Screw PC4-M10 Mount V3.stl
HMG7.3 TriangleLab Dragon Clone PC4-M10 Mount V2.stl
HMG7.3 Phaetus DropEffect XG5 PC4-M10 Mount.stl
HMG7 E3D Revo Voron PC4-M10 Cap.stl
LACK Enclosure Filament Passthrough with PC4-M10 Coupler
PTFE M10 Wall Mount
PTFE M10 Flanged Nut
M9 (AKA M10) Threaded PTFE Fitting End Mount
Pneumatic PC4-10 Mount (PTFE)
Bowden Tube 45 Degree Wall Pass-Through
Neptune 3 Pro/Plus/Max Filament Runout Gantry Mount with PTFE Fittings
