Make your bare bulbs beautiful with this color filter. Print in different colors to quickly fit the mood! Designed to be printed with translucent PETG and used with a low temperature E27 LED lightbulb only.

CAUTION: Some LED bulbs can still produce significant heat, and while PETG is generally self-extinguishing, it's still flamable, so use discretion to ensure your safety by monitoring your setup until you are confident it won't overheat.

This is a single color version, but you can always swap filaments for horizontal stripes! I also have a Twisted Version available for my paid members!

Printing Guidelines

Two versions of this two part model are included. Labeled 1.6mm and 2.4mm, referring to the thickness of the shell. The 2.4mm version is more robust and will make the color of your filament stronger, while the 1.6mm version will let more light through.

Print solid. No supports required. Remove carefully from buildplate, ensuring you don't bend or snap the thinner parts. You can also stack filters for more nuanced coloration.

Filaments Used *

I just bought a ton of bright transparent PETG filaments from 3DJake using my Thangs Weekly Leaderboard rewards ;D Happy with all of them

• The Filament ReFill PETG Transparent Red and Transparent Blue
• 3DJake PETG Yellow Transparent and Green Transparent
• Fillamentum PETG Iced Green Transparent and Pink Lollipop Transparent -Spectrum PETG Premium Transparent Orange

*These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!