These adorable heart compacts are a fun throwback to the nostalgic designs we all loved from the 80s and 90s! They're super easy to print with both AMS and non-AMS printers, and you can choose between two versions—one with space to pop in a 2" mirror or one without. Whether you're using it to hold little keepsakes or simply adding a playful touch to your everyday life, this compact is a quick and sweet print that’s sure to bring a smile!

Print Settings -I recommend using a brim to prevent any lifting during the print

• Supports required. Set Top Z distance slightly higher than your layer height (e.g., for 0.2mm layer height, use 0.22mm) for easier removal
• 8-10% infill.
• 2-3 walls
• 0.4mm nozzle
• 0.12mm layer height for the top designs, 0.12 - 0.2mm layer height everywhere else
• Use 3MF file if you want to use your AMS for the colored top

Items Used:

• Electric Pink PLA: https://www.matterhackers.com/store/l/pro-series-pla/sk/M4NHSL10?aff=7646
• Pastel Pink PLA: https://amzn.to/4eBr81X
• Peach PLA: https://amzn.to/47YmN73
• 2" Mirror: https://www.hobbylobby.com/crafts-hobbies/glass-crafting/mirrors/round-craft-mirrors/p/22816

Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.

Assembly Video: https://youtu.be/-8XaRrt9Cyw