tracking pixel
X

Sleeve for 3D/BL Touch Sensor

by
xrxca
Follow
Follow
Remix Model
X
xrxca
Image 1 of 4
Sleeve for 3D/BL Touch Sensor 3d model
2D
3D
Makes
Sleeve for 3D/BL Touch Sensor 3d model
Sleeve for 3D/BL Touch Sensor 3d model
Sleeve for 3D/BL Touch Sensor 3d model
Sleeve for 3D/BL Touch Sensor 3d model
This model is restricted by licensing terms. 
0 Likes1 DownloadsAugust 26, 2023
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4695076.

Sleeve to protect a 3D or BL Touch Sensor, and cover the LED

After my Touch sensor crashed into a part that came off the build plate, I wanted a shield for it. I also wanted to cover the LED as it was overly bright in my captures.

I designed it from scratch in OpenSCAD to go over the sensor from the bottom, so the probe is protected unless deployed, and it replaces any nuts used for mounting the sensor, just 3mm bolts into the sleeve (I tapped the holes, but you should be able to put bolts in without tapping (do so before trying to mount in place).

It's fairly tight to the sensor but may require adjusting of the mount used so the sleeve clears other parts.


0 Likes1 DownloadsAugust 26, 2023





This model is restricted by licensing terms. 
0 Likes1 DownloadsAugust 26, 2023
This model is restricted by licensing terms.