volkandogan16259 followers

Follow

Pulley

8 downloads · 5 years ago · 3D Modeling By Solidworks

3D Modeling By Solidworks

Discussions

Pulley

8 downloads · 5 years ago in

Mechanical Parts

and

Replacement Parts

volkandogan16259 followers

Follow

More models

printableconcrete

Soft shackle ball bearing pulley - Design by http://www.fiberprinting.com/ - Rendering by http://www.folkloricum.com/ - Photographs taken on site at http://www.budapest.homes/

This pulley was designed for low to medium operational loads, but will hold the rope up to the breaking strength of the soft shackle that was used in the assembly. Use 3mm dyneema lines for the soft shackle, and rope up to 6mm in diameter for the running line. The pulley has been tested up to 100kgf under the sun for 3 days. No deformation was observed.

Printing

Use carbon fiber reinforced PLA for the inner rings as well as for the pulley wheel. The more stiff the material is, the more even the loading on the BB soft gun balls will be. Use regular Pla or PLA+ for the side plates for more flexibility during side-loading and rope vibration. White would be the best choice as it is the color that heats up the less under the sun. PLA is compatible with most glues, so methacrylate glue will adhere well to the parts during assembly. Use 100% infill for the inner rings and the pulley wheel. Use 50-100% infill for the side plate.

Assembly

The side plates have a sacrificial layer that has to be cut out. This layer allows printing without supports and thus saves filament. Lay the pulley wheel and the right inner ring flat. Introduce 10 pieces of 6mm BB soft gun balls while lifting the pulley. Add 10 more balls to complete the second row. Apply some methacrylate glue (superglue) to the joining surface of the left tinner ring, and press the two rings together. At last, glue the two sides panels. Insert the soft shackle and enjoy. - 3d model

Soft shackle ball bearing pulley

printableconcrete

Soft shackle ball bearing pulley - 2023 UPDATE - Design by http://www.fiberprinting.com/ - Rendering by http://www.folkloricum.com/ - Photographs taken on site at http://www.budapest.homes/

This pulley was designed for low to medium operational loads, but will hold the rope up to the breaking strength of the soft shackle that was used in the assembly. Use 3mm dyneema lines for the soft shackle, and rope up to 6mm in diameter for the running line. The pulley has been tested up to 100kgf under the sun for 3 days. No deformation was observed.

Printing

Use carbon fiber reinforced PLA for the inner rings as well as for the pulley wheel. The more stiff the material is, the more even the loading on the BB soft gun balls will be. Use regular Pla or PLA+ for the side plates for more flexibility during side-loading and rope vibration. White would be the best choice as it is the color that heats up the less under the sun. PLA is compatible with most glues, so methacrylate glue will adhere well to the parts during assembly. Use 100% infill for the inner rings and the pulley wheel. Use 50-100% infill for the side plate.

Assembly

The side plates have a sacrificial layer that has to be cut out. This layer allows printing without supports and thus saves filament. Lay the pulley wheel and the right inner ring flat. Introduce 10 pieces of 6mm BB soft gun balls while lifting the pulley. Add 10 more balls to complete the second row. Apply some methacrylate glue (superglue) to the joining surface of the left tinner ring, and press the two rings together. At last, glue the two sides panels. Insert the soft shackle and enjoy. - 3d model

Soft shackle ball bearing pulley - 2023 UPDATE

3D Printed High Strength Pulley System (Block and Tackle) 3d model

3D Printed High Strength Pulley System (Block and Tackle)

Idler Pulley for 624 Bearing and GT2 belt 3d model

Idler Pulley for 624 Bearing and GT2 belt

Vertex Delta Belt pulley upgrade 3d model

Vertex Delta Belt pulley upgrade

Deseret Manufacturing

Bambu Labs x1 Carbon Filament direction changer pulley 3d model

Bambu Labs x1 Carbon Filament direction changer pulley

Pulley 3d model

Pulley

Voxelab Aquila Filament Feed Pulley, no bearing needed. 3d model

Voxelab Aquila Filament Feed Pulley, no bearing needed.

filament guide bearing pulley ender 3 3d model

filament guide bearing pulley ender 3

16 Teeth Pulley 3d model

16 Teeth Pulley

Deseret Manufacturing

Bambu Lab Filament pulley for carbon x1 3d model

Bambu Lab Filament pulley for carbon x1

Pulley Snap Lever Fidget – Arcade-Inspired Kinetic Desk Toy 3d model

Pulley Snap Lever Fidget – Arcade-Inspired Kinetic Desk Toy

Simple Sturdy Pulley 3d model

Simple Sturdy Pulley

fullspectrumrehab

Finger Pulley Splints 3d model

Finger Pulley Splints

Pulley - Customizable Parametric 3d model

Pulley - Customizable Parametric

Kayak Hoist Pulley Wheel 3d model

Kayak Hoist Pulley Wheel

Pulley Alternator like.stl 3d model

Pulley Alternator like.stl

Ender 3 X-Pulley Cover Belt Guard Low Profile

Filament Guide For Red Aluminum Btech Double Gear Pulley Drive Extruder 3d model

Filament Guide For Red Aluminum Btech Double Gear Pulley Drive Extruder

Snatch_Block_Pulley 3d model

Snatch_Block_Pulley