Parametric Bins - Various Heights and Sizes

A0 - 35.25mm - 2x2.3mf

Elegoo Arduino Uno R3 and Breadboard Workspace

**What:** 
	- Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone.
	- Notes: For some reason the bottom left peg doesn't match up with models that were available. It was offset to the right by ~0.2mm. I am not sure if this is unique to the Elegoo or maybe the model is off but I did adjust and seems to work fine for me.

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- Getting back into some electronics work and didn't want the breadboard and microcontroller sliding around the desk. This setup just makes it easier to move aside when I have to get actual work done and not just have fun playing with Arduino.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)
	- [Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino UNO](https://www.amazon.ca/ELEGOO-Project-Complete-Starter-Tutorial/dp/B01M9CHF1J/ref=sr_1_1_sspa?crid=9J6QCC2OKSH&keywords=elegoo+arduino+uno&qid=1651121792&s=industrial&sprefix=elegoo+arduino+uno%2Cindustrial%2C124&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQURQVlZBVU4wRDNXJmVuY3J5cHRlZElkPUEwNzE5MzE5UE5RUFJGU09NSUIxJmVuY3J5cHRlZEFkSWQ9QTEwMjM5ODQ2QUhERU9CRlJZQkwmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl)


Elegoo Arduino Uno R3 and Breadboard Workspace v3.3mf

Filament Spool Retainer Clip.3mf

**What:** 
- Filament spool holder/stand that slides onto 0.5" x 1.0" wood or just sit on flat surface
- Notes: There is hole for a #8 wood screw on the bottom to prevent it from moving around but I found that it wasn't need for my purposes

**How:** 
- Printer: Elegoo Netptue 2S
- Nozzle: 0.4mm
- Slicer: Cura Modified CHEP FF Profile for EN2S
- Filament: Overture PLA Black 1.75MM

**Why:**
- My brother had an old DVD shelf (maybe IKEA?) that my rolls of filament could just precariously sit on. Adding this little clip allows them to sit reasonably well and I can just print off more as needed and slide together. Nothing fancy but it works. I doubt they make the shelves anymore but could be useful to somewhere out there.

**Where:**
- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)


Wireless Charger - Green Lantern Ring v2.3mf

Wireless charger sits in green lantern ring - added bonus, the charger has green LED when in use.

Small Parts Bin Separator v2.3mf

PA Small Parts Bin was cheap but had no plastic clips to use as separator so I made my own.

N2_Princess Auto - Small Parts Bin Separator v2.3mf

Interlocking Statue Head Mounts v5.3mf

Designed for a variety of 1/6 scale statues that come with extra heads and needed a place to store that can expand

Parametric French Cleat Clips

Clip - Honeycomb.3mf

Parametric Grid System

Grid - Large - 4x4.3mf

Voltbike e-Bike Front Light Mount v2.3mf

Mounting bracket for front light on eBike

e-Bike Front Light Mount v2 v2.3mf

Weekend maker of things - total amature but enjoy spending time with my kids creating things that are fun and useful!

sjcundy

Achievements

Seedling

Voyager

Debutant