**What:** 
	- Arrangement of bins in various sizes and orientations to work with a standard grid system . The grids sit in drawers for bins to sit in and keep them from sliding around. The grids were designed for quick printing and based on 55mm x 55mm dimensions so the bins are also based on that 55mm x 55mm design in various heights and you can stack them as well.
	- Available in various heights: 35.25mm, 47.75mm, 65mm, and 90mm 
	- Notes: you will lose a bit of overall height when the bins are stacked but I am revising my models to compensate. In the future I might come up with another option that has less slop to it and don't need to compensate but for now these are working great for me. Also there is a good amount of clearance on the base which I could tighten up but again, these work great for me.

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- Mostly I just wanted to learn Fusion 360 and this was the best way to explore parametric design while having something functional. My desk drawers are a mess and look so much better now. There are plenty of tweaks I would like to make but for now these do the job for me.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)


Parametric Bins - Various Heights and Sizes

A0 - 35.25mm - 2x2.3mf

A1 - 65mm - 2x1.3mf

A1 - 65mm - 2x2.3mf

A1 - 65mm - 2x3.3mf

A1 - 65mm - 2x4.3mf

A1 - 65mm - 3x1.3mf

A1 - 65mm - 3x2.3mf

A1 - 65mm - 3x3.3mf

A1 - 65mm - 3x4.3mf

A1 - 65mm - 4x1.3mf

A1 - 65mm - 4x2.3mf

A1 - 65mm - 4x3.3mf

A1 - 65mm - 4x4.3mf

A1 - 65mm - 1x1.3mf

A1 - 65mm - 1x2.3mf

A1 - 65mm - 1x3.3mf

A1 - 65mm - 1x4.3mf

B0_C0 - 47.75mm - 3x1.3mf

B0_C0 - 47.75mm - 3x2.3mf

B0_C0 - 47.75mm - 3x3.3mf

B0_C0 - 47.75mm - 3x4.3mf

B0_C0 - 47.75mm - 4x1.3mf

B0_C0 - 47.75mm - 4x2.3mf

B0_C0 - 47.75mm - 4x3.3mf

B0_C0 - 47.75mm - 4x4.3mf

B0_C0 - 47.75mm - 1x1.3mf

B0_C0 - 47.75mm - 1x2.3mf

B0_C0 - 47.75mm - 1x3.3mf

B0_C0 - 47.75mm - 1x4.3mf

B0_C0 - 47.75mm - 2x1.3mf

B0_C0 - 47.75mm - 2x2.3mf

B0_C0 - 47.75mm - 2x3.3mf

B0_C0 - 47.75mm - 2x4.3mf

B1 - 90mm - 3x1.3mf

B1 - 90mm - 3x2.3mf

B1 - 90mm - 3x3.3mf

B1 - 90mm - 3x4.3mf

B1 - 90mm - 4x1.3mf

B1 - 90mm - 4x2.3mf

B1 - 90mm - 4x3.3mf

B1 - 90mm - 4x4.3mf

B1 - 90mm - 1x1.3mf

B1 - 90mm - 1x2.3mf

B1 - 90mm - 1x3.3mf

B1 - 90mm - 1x4.3mf

B1 - 90mm - 2x1.3mf

B1 - 90mm - 2x2.3mf

B1 - 90mm - 2x3.3mf

B1 - 90mm - 2x4.3mf

**What:** 
	- Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone.
	- Two different orientations depending on preference.
	- Notes: For some reason the bottom left mounting hole of Uno doesn't match up with models that were available. It was offset to the right by ~0.2mm. I am not sure if this is unique to the Elegoo or maybe the model is off but I did adjust and seems to work fine for me.

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- Getting back into some electronics work and didn't want the breadboard and microcontroller sliding around the desk. This setup just makes it easier to move aside when I have to get actual work done and not just have fun playing with Arduino.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)
	- [Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino UNO](https://www.amazon.ca/ELEGOO-Project-Complete-Starter-Tutorial/dp/B01M9CHF1J/ref=sr_1_1_sspa?crid=9J6QCC2OKSH&keywords=elegoo+arduino+uno&qid=1651121792&s=industrial&sprefix=elegoo+arduino+uno%2Cindustrial%2C124&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQURQVlZBVU4wRDNXJmVuY3J5cHRlZElkPUEwNzE5MzE5UE5RUFJGU09NSUIxJmVuY3J5cHRlZEFkSWQ9QTEwMjM5ODQ2QUhERU9CRlJZQkwmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl)


Elegoo Arduino Uno R3 and Breadboard Workspace

**What:** 
	- Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone.
	- Notes: For some reason the bottom left peg doesn't match up with models that were available. It was offset to the right by ~0.2mm. I am not sure if this is unique to the Elegoo or maybe the model is off but I did adjust and seems to work fine for me.

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- Getting back into some electronics work and didn't want the breadboard and microcontroller sliding around the desk. This setup just makes it easier to move aside when I have to get actual work done and not just have fun playing with Arduino.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)
	- [Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino UNO](https://www.amazon.ca/ELEGOO-Project-Complete-Starter-Tutorial/dp/B01M9CHF1J/ref=sr_1_1_sspa?crid=9J6QCC2OKSH&keywords=elegoo+arduino+uno&qid=1651121792&s=industrial&sprefix=elegoo+arduino+uno%2Cindustrial%2C124&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQURQVlZBVU4wRDNXJmVuY3J5cHRlZElkPUEwNzE5MzE5UE5RUFJGU09NSUIxJmVuY3J5cHRlZEFkSWQ9QTEwMjM5ODQ2QUhERU9CRlJZQkwmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl)


Elegoo Arduino Uno R3 and Breadboard Workspace v3.3mf

Elegoo Arduino Uno R3 and Breadboard Workspace v4.3mf

**What:** 
- Filament spool holder/stand that slides onto 0.5" x 1.0" wood or just sit on flat surface
- Notes: There is hole for a #8 wood screw on the bottom to prevent it from moving around but I found that it wasn't need for my purposes

**How:** 
- Printer: Elegoo Netptue 2S
- Nozzle: 0.4mm
- Slicer: Cura Modified CHEP FF Profile for EN2S
- Filament: Overture PLA Black 1.75MM

**Why:**
- My brother had an old DVD shelf (maybe IKEA?) that my rolls of filament could just precariously sit on. Adding this little clip allows them to sit reasonably well and I can just print off more as needed and slide together. Nothing fancy but it works. I doubt they make the shelves anymore but could be useful to somewhere out there.

**Where:**
- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)


Filament Spool Retainer Clip.3mf

**What:** 
	-  Green Lantern Ring retainer for the VITAL Fabric Wireless Charger with Qualcomm® Quick Charge™ Technology.
	-  Notes: The wireless pad I made this for is approx 99.2mm in diameter and glows green when charger.

**How:** 
	-  Printer: Elegoo Netptue 2S
	-  Nozzle: 0.4mm
	-  Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: AMZ3D PLA Green 1.75MM

**Why:**
	-  My brother had a wireless charging pad that we thought would look cool if set in in something as the the Enterprise google mini stand made us think we should do something like that. Worked out even better when we realized that when the phone is charging the wireless pad glowed green.

**Where:**
	-  [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	-  [AMZ3d Filiment](https://www.amazon.ca/gp/product/B01CX93TMQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1)
	- [Vital Fabric Wireless Charger - The Source](https://www.thesource.ca/en-ca/cell-phones/portable-battery-power/wireless-charging/vital-fabric-wireless-charger-with-qualcomm%c2%ae-quick-charge%e2%84%a2-technology--blue/p/108080359)


Wireless Charger - Green Lantern Ring v2.3mf

Wireless charger sits in green lantern ring - added bonus, the charger has green LED when in use.

**What:** 
	- Various inserts to separate items in small storage bins including:
	- Princess Auto 12 Drawer Parts Cabinet
	- Craftsman 9 Large Drawer Bin System
	- Craftsman Small Parts Organizer - 30 Drawers - Polypropylene
	- Notes: nothing to fancy here although I did play with the emboss tool a bit on one of them

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- I occasionally pick up small parts bins and they don't always come with the small inserts to separate out the components. So, I need to print them off on occasion to keep things organized.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
	- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)
	- [Princess Auto Powerfist 12 Drawer Parts Cabinet](https://www.princessauto.com/en/12-drawer-parts-cabinet/product/PA0008870495)
	- [Craftsman 9 Large Drawer Bin System](https://www.rona.ca/en/product/craftsman-9-large-drawer-bin-system-cmst40709-00276583)
	- [Craftsman Small Parts Organizer - 30 Drawers - Polypropylene](https://www.rona.ca/en/product/craftsman-small-parts-organizer-30-drawers-polypropylene-cmst40730-00277115)


Small Parts Bin Separator v2.3mf

PA Small Parts Bin was cheap but had no plastic clips to use as separator so I made my own.

N2_Princess Auto - Small Parts Bin Separator v2.3mf

Craftsman - Medium.3mf

Craftsman - Small.3mf

**What:** 
	- Designed for a variety of scale statues that come with extra heads and needed a place to store that can expand
	- Notes: was really just experimenting with clearances and dovetail joints but still useful

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: AMZ3D PLA Green 1.75MM

**Why:**
	- My brother is an avid collector of many things and has statues… so many statues. Often they come with extra heads for different looks/etc but he had no where to put them. These interlocking blocks allowed for easy use and safe place to keep them separate withing rolling around and getting scuffed.

**Where:**
	-  [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
 [AMZ3d Filiment](https://www.amazon.ca/gp/product/B01CX93TMQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1)

Interlocking Statue Head Mounts v5.3mf

Designed for a variety of 1/6 scale statues that come with extra heads and needed a place to store that can expand

My attempt at a parametric grid system with bins and French cleat adapters.. Learning to use fusion 360 and has been an awesome experience.

Parametric French Cleat Clips

Clip - Honeycomb.3mf

**What:** 
	- Simple grid system for drawers to sit in and keep them from sliding around. These grids were designed for quick printing and based on 55mm x 55mm dimensions. There are three grids to choose from that basically max out with what my printer can do. 
	- I generally use CA glue to stick the grids to the bottom of the drawer and it seems to work well
	- Notes: there are many ways to make this work and other grid systems out there so make sure you look around if these aren't for you :)

**How:** 
	- Printer: Elegoo Netptue 2S
	- Nozzle: 0.4mm
	- Slicer: Cura Modified CHEP FF Profile for EN2S
	- Filament: Overture PLA Black 1.75MM

**Why:**
	- Mostly I just wanted to learn Fusion 360 and this was the best way to explore parametric design while having something functional. My desk drawers are a mess and look so much better now. There are plenty of tweaks I would like to make but for now these do the job for me.

**Where:**
	- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
[Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)

Parametric Grid System

Grid - Large - 4x4.3mf

**What:** 
- Mounting bracket for Voltbike e-Bike Light that sits on front frame of bike above the fender.
- Notes: The teeth on clip are larger than original but still creates enough friction to keep the light from slipping out of position once tightened.

**How:** 
- Printer: Elegoo Netptue 2S
- Nozzle: 0.4mm
- Modelling Software: Fusion 360
- Slicer: Cura Normal Profile (I think - I was still figuring out Cura at the time)
- Filament: Overture PLA Black 1.75MM

**Why:**
- My Dad's friend had an older Voltbike e-bike and on his first outing crashed, broke the front light, and never rode again. My dad picked it up and my kids and I have been enjoying for the past couple of years. I could never find a replacement bracket so when I got my first 3D printer in April 2022 I learned the basics of Fusion360 and made my own!

**Where:**
- [Voltbike](https://www.voltbike.com/)
- [Elegoo Neptune 2S](https://www.elegoo.com/products/neptune2s-fdm-printer)
- [Overture Filiment](https://www.amazon.ca/stores/OVERTURE/page/1BA409CF-469C-4ABD-BCEA-AEB78DF88001?ref_=ast_bln)


Voltbike e-Bike Front Light Mount v2.3mf

Mounting bracket for front light on eBike

e-Bike Front Light Mount v2 v2.3mf

Weekend maker of things - total amature but enjoy spending time with my kids creating things that are fun and useful!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

sjcundy