sanahi

Raspberry pi zero w camera case

by
sanahi
Follow
Follow
Remix Model
sanahi
sanahi
|
Image 13 of 19
Raspberry pi zero w camera case 3d model
sanahi
sanahi
|
Image 13 of 19
Raspberry pi zero w camera case 3d model
2D
3D
Makes
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
Raspberry pi zero w camera case 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4906816.

Raspberry pi ZERO w camera case A case to store Raspberry pi ZERO w (wh or unmarked) and camera module Update
  • 20210821 Added lens cover for 100 yen uniform lens mounting RaspPiW2LenzCover3.stl RaspPiW2LenzCover4.stl

  • 20210805 Increased the thickness of the screw holes for mounting the lens cover on the case side by 3 mm RaspPiWCameraCase3.stl

  • 20210725,20210717, 20210801

  • Organize stl filenames

  • Added version without camera (for external USB camera) RaspPiW1Case.stl

  • Lens cover 2 added (for suction cups and hooks) RaspPiW2LenzCover2.stl

  • Add hook RaspPiW3LenzHook.stl

  • Changed so that the camera module can be rotated 90 degrees and installed. RaspPiWCameraCase2.stl

  • Changed to a version that is screwed so that the mount will not come off RaspPiWMount2.stl

detail
  • If the board is WH type, the GPIO header will interfere, so remove the header or cut off the pins with nippers etc.
  • Insulate the back of the camera module as it is quite narrow.
  • For the mount, press in a W1 / 4 (spanner size 10 mm) hexagon nut.
  • If the heat sink interferes, cut out the cooling slit.
  • Tapping screw size for mounting each part (reference) 2.6mm x 8mm.
  • If the screw hole for a 100-yen uniform lens does not fit, enlarge it appropriately. Size (Reference) ISO meter screw M17x1
Additional print settings
  • Raft=OFF, Support=OFF, Infill=50-100% RaspPiW1CameraCase3.stl RaspPiW1Case.stl RaspPiW2LenzCover1.stl RaspPiW2LenzCover2.stl

  • Raft=OFF, Support=ON, Infill=50-100% RaspPiW3LenzHook.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl

  • Raft=ON, Support=ON, Infill=50-100, Resolution=0.12 mm or less RaspPiW2LenzCover3.stl RaspPiW2LenzCover4.stl

Reference print preset
  • Standard RaspPiW1CameraCase3.stl RaspPiW2LenzCover1.stl or RaspPiW2LenzCover3.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl

  • For suction cups and hooks RaspPiW1CameraCase3.stl RaspPiW2LenzCover2.stl or RaspPiW2LenzCover4.stl RaspPiW3LenzHook.stl RaspPiW4Cover.stl

  • For external camera RaspPiW1Case.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl


[Japanese]

Raspberry pi ZERO w カメラケース Raspberry pi ZERO w(wh または無印も可) とカメラモジュールを収納するケースです Update
  • 20210821 100均レンズ取付用レンズカバーを追加 RaspPiW2LenzCover3.stl RaspPiW2LenzCover4.stl

  • 20210805 ケース側、レンズカバー取付用のネジ穴の厚みを3mm増加 RaspPiWCameraCase3.stl

  • 20210725,20210717, 20210801

  • stlファイル名の整理

  • カメラ取付無し版を追加(外付けUSBカメラ用) RaspPiW1Case.stl

  • レンズカバー2追加(吸盤、フック用) RaspPiW2LenzCover2.stl

  • フック追加 RaspPiW3LenzHook.stl

  • カメラモジュールを90度回転させて取付できるように変更 RaspPiWCameraCase2.stl

  • マウントが抜けない様にネジで止めるバージョンに変更 RaspPiWMount2.stl

詳細
  • WHの場合、GPIOのヘッダは干渉するため、ヘッダを取り除くか、ピンをニッパ等で切り取ってください
  • かなり狭いのでカメラモジュール裏面は絶縁してください
  • マウント部は、W1/4(スパナサイズ10mm)六角ナットを圧入してください
  • ヒートシンクが干渉する場合、冷却用のスリットを切り取ってください
  • 各部取付用 タッピングネジ サイズ(参考) 2.6mm x 8mm
  • 100均レンズ用のネジ穴が入らない場合は適度に拡大してくださいサイズ(参考) ISOメートルネジ M17x1
追加の印刷設定
  • ラフト無、サポート材無、インフィル50%~100% RaspPiW1CameraCase3.stl RaspPiW1Case.stl RaspPiW2LenzCover1.stl RaspPiW2LenzCover2.stl

  • ラフト無、サポート材有、インフィル50%~100% RaspPiW3LenzHook.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl

  • ラフト有、サポート材有、インフィル50%~100%、積層ピッチ0.12mm以下 RaspPiW2LenzCover3.stl RaspPiW2LenzCover4.stl

参考印刷プリセット
  • 標準 RaspPiW1CameraCase3.stl RaspPiW2LenzCover1.stl or RaspPiW2LenzCover3.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl

  • 吸盤、フック用 RaspPiW1CameraCase3.stl RaspPiW2LenzCover2.stl or RaspPiW2LenzCover4.stl RaspPiW3LenzHook.stl RaspPiW4Cover.stl

  • カメラ外付け用 RaspPiW1Case.stl RaspPiW4Cover.stl RaspPiW5Mount2.stl


0 Likes12 DownloadsNovember 23, 2021


0 Likes12 DownloadsNovember 23, 2021
This model is restricted by licensing terms.