3 part 1U high, 19 inch rack mount for (3) Vision Five 2's. This is the final version. Hopefully it works for whoever else also wanted a similar solution. Parts: (4 per unit(12 total)) M2.5 hex nuts (4 per unit (12 total)) M2.5 x 15 (or slightly longer) button head screws (4) M3 hex nuts (4) M3 x 10 button head screws
Features: -Cable guide near usb-c power port. -Built-In supports -Posts tall enough to install nvme's <= ~6.5mm in height. -Grill for air intake underneath where nvme mounts. -Retained hex nuts for more stable connection between parts.
Notes: Should be printable without additional supports, as this model features built-in supports, but I recommend using supports from build plate for better finish on the underside of the holes for m2.5 nuts in the base of the model.