3 part 1U high, 19 inch rack mount for (3) Vision Five 2's.
This is the final version. Hopefully it works for whoever else also wanted a similar solution.
Parts:
(4 per unit(12 total)) M2.5 hex nuts
(4 per unit (12 total)) M2.5 x 15 (or slightly longer) button head screws
(4) M3 hex nuts
(4) M3 x 10 button head screws

Features:
-Cable guide near usb-c power port.
-Built-In supports
-Posts tall enough to install nvme's  <= ~6.5mm in height.
-Grill for air intake underneath where nvme mounts.
-Retained hex nuts for more stable connection between parts.


Notes:
*Should* be printable without additional supports, as this model features built-in supports, but I recommend using supports from build plate for better finish on the underside of the holes for m2.5 nuts in the base of the model. 



Vision Five 2 1U Mount

Vision Five 2 1U Mount v3 Middle.stl

VisionFive 2 Base Mount.stl

Mount designed to attach a LGX Lite directly to a MK8 style heatsink. Designed as part of my effort to mod/repair my Sidewinder X1.
Thicker piece is designed to take m3 heatset inserts. Alignment pins to help hold the mount in place, and if I understand how the included nuts that came w/ the lgx lite are to be used, 2 m3 holes to affix the mount to the bottom of the extruder with.
Cooling fan mount has been designed, its intended to take m3 heatset inserts that are around 5.7 mm in length. Mount fits a 25mm square fan. Theres a version with ears to improve bed adhesion, in case you need them. It's intended to be printed from the fan mount, with the brace up in the air, but I'm sure there are more orientations that would work better.

Mk8 Heatsink LGX Lite Mount

Mount designed to attach a LGX Lite directly to a MK8 style heatsink. Designed as part of my effort to mod/repair my Sidewinder X1.
Thicker piece is designed to take m3 heatset inserts. Alignment pins to help hold the mount in place, and if I understand how the included nuts that came w/ the lgx lite are to be used, 2 m3 holes to affix the mount to the bottom of the extruder with.
Next step is to design a new cooling fan mount.

LGX Lite 25mm axial fan mount for mk8 w ears.stl

LGX Lite 25mm axial fan mount for mk8.stl

Building a custom rack/case to hold all of my home server equipment. Decided on some cheap angle aluminum for the frame, and whipped up some connectors.
V2 has been posted, the parts dimensions have been scaled to accommodate angle aluminum based on my 3d printers tolerances to PETG.
The exterior wall of the part has also been made slightly thicker, and a Fillet was added to the exterior as well.
Holes are 5.7mm, they're ment to be tapped w/ a 6mm tap after the fact.
I'll also probably post a version that takes 6mm heat set inserts too.

Edit*
Design inspired by 
https://www.thingiverse.com/thing:4736638

One sixteenth by three quarter inch Angle Aluminum corner connector

Building a custom rack/case to hold all of my home server equipment. Decided on some cheap angle aluminum for the frame, and whipped up some connectors.
Parts will probably need to be scaled for printing, as the file doesn't take into consideration 3d printing tolerances.
Holes are 5.7mm, they're ment to be tapped w/ a 6mm tap after the fact.
Will post an updated version after I get my printer repaired, and sit down and adjust for tolerances. I'll also probably post a version that takes 6mm heat set inserts too.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

admadea

Achievements

Seedling

Explorer

Vision Five 2 1U Mount

Mk8 Heatsink LGX Lite Mount

One sixteenth by three quarter inch Angle Aluminum corner connector