Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5368393.

Update 2 May 2023: Add enlarged straw hole version (+0.2mm diameter). I have not tested printing this, will do so and update if issues are observed.

I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed with the simple design. I have a few WD-40 and other spray cans with straws, tried it and it works!

I had some initial difficulty inserting the straw into the hole, it eventually went in.

And so I made some design changes to improve the straw insertion.

I had the hole for the straw elongated along a slant surface with a chamfer to guide the straw in easier.

I did it for the 360ml (65.5mm) and 250ml (52.5mm) can sizes.

It seems better to me, hope others feel the same.

Want to buy me a coffee? https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link: https://s.click.aliexpress.com/e/_DeAZr9P

Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j

For Amazon affiliate links https://wp.me/peMLu6-2C