Fix Sinking Office Chair – Clamp to Stop Chair from Sinking

No Supports Needed

Duplicate the model to print both sizes.

Dimensions Height: 32 mm / 3 cm / 1.2 in Inside tube diameter: 30 mm / 3 cm / 1.2 in

Extra Hardware (choose one option or combine) Screws: M5 × 20 mm (2) Nuts: M5 (2) Cable ties: 28 cm / 11 in (2)

Print Settings Material: PLA, 1.75 mm Nozzle: 0.6 mm Walls: 6 Layer height: 0.3 mm Infill: 10% Supports: None

Print Time & Material Print time: ~1.2 hours @ 100 mm/s (both sizes) Material usage: ~40 g total (both sizes)