A  screw-on funnel for a 1 l spot a resin bottle.  It is based on the same concept as a couple of other screw-on funnels (Funnel for resin bottles by Anycubic, Elegoo, Geeetech,

… , and Funnel for ERYONE resin bottle (500 g) by TBA) but I ended up doing it from scratch to change a few things.

I'm not quite sure whether to call that a remix or not, but it definitely follows the same pattern.

Spot-A Resin bottle funnel

Spot A Elastic funnel.stl

A  screw-on funnel for a 500 ml Phrozen resin bottle.  It is based on the same concept as a couple of other screw-on funnels but I ended up doing it from scratch.

I'm not quite sure whether to call that a remix or not.

Phrozen Resin bottle funnel

Phrozen Funnel.stl

A rack for hanging stuff on the wall.  Expandable.

 

If you print the v2 top at .2mm layer height, the layer changes add some detail to the flower.

Wall rack

Top Base v2.stl

A silverware strainer for hanging on the side of a dish strainer.

Strainer.stl

A foot for a table leg to protect flooring.

Table Foot.stl

A grommet to shield cables passed through a hole in a winch mount.



Used soft tpu.

Winch Grommet Flat Side.stl

A replacement lid for a coffee mug.

Paused the print and switched to tpu for the bottom of the lid.

Mug Cap v6.stl

Chair leg covers for our barstools to protect floor and stop squeaking.

Printed in TPU

Chair leg covers

Front Leg 1.stl

Tool Rack screw mount.stl

A simple door latch that can be placed high on our sliding glass door to prevent children from being able to get to the pool unsupervised.

print in place.  I blocked support where the latch goes through the hasp.

Drop Latch

Latch v1.stl

A small display stand I made for my wife to elevate decorative items displayed on the top of our kitchen cabinets.

Printed upside down requires no supports.

Display stand

Display Stand.3mf

Wall hanger for tools like ladders, and sawhorses.

Wall hanger

Sawhorse Hanger v2.3mf

Mechanism for stopping handle rotation on a bathroom faucet. This piece is keyed to the splines and has tabs on either side that stop rotation when they contact a tab in the housing.
I didn't have calipers, when I was designing, so I guessed a size and matched by scaling x/y on the slice. I think 120% size was the one that fit.

Faucet Stop.stl

A replacement latch for my Ryobi Circular Saw Case.

Case Latch

I have some tiny pills I need to take multiple times per day. I made this to help me keep track of whether I had taken them.

Turns out it was not quite large enough as designed, but I just scaled it up in the slicer, and it works well for me.

Nice thing is that you can just keep adding middle sections to make it as large as you want.

No tricks to print this one. It prints easily, and works fine.

Pill Box

Pill Box Middle.3mf

Roomba Tire.stl

Holds roomba charger to baseboard (with doublestick tape).

Roomba Charger Holder.stl

Rag and sponge holder

Sponge Holder.stl

Replacement basket for Hayward pool skimmer along with replacement nut and washer.

akwerdesigns

Spot-A Resin bottle funnel

Phrozen Resin bottle funnel

Wall rack

Strainer.stl

Table Foot.stl

Winch Grommet Flat Side.stl

Mug Cap v6.stl

Chair leg covers

Tool Rack screw mount.stl

Drop Latch

Display stand

Wall hanger

Faucet Stop.stl

Case Latch

Pill Box

Roomba Tire.stl

Roomba Charger Holder.stl

Rag and sponge holder

Pool Skimmer basket

Leaf Catcher.stl

Ford Switch Panel

Fleur-de-lis finial

Budweiser Can Lid

Fly Protection Can Lid

Coors Can Lid.stl

BadgeHolder.stl