PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 🥒💖

Hi again! We’ve had quite a few requests for more pickles, so we wanted to add a fun Valentine’s twist 🥒💖

We added a pickle face with heart eyes, along with several variants of pickles holding hearts. As usual, I also wanted to include a few base options, and thought top hats and bows would be a cute touch!

All of these are interchangeable with our previous pickle packs, Pickle Pals, and Deck the Dills! Hope you have fun mixing and matching!

This pack contains 8 unique base designs and 6 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration. Caps are offered in raised variants where able.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• CookieCad Green Apple Elixer PLA
• CookieCad Pixie Dust PLA
• CookieCad Ruby Red Elixir PLA
• Elegoo White PLA
• Overture Black PLA

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended) Only one wall on first layer: True (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat). For the raised caps, print them face up so you have a nice textured surface.

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com