PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 📺📡📶

Hi everyone!

This pack started with me just playing around with a simple TV design. When I showed it to a few people, everyone said it needed arms and legs—so we added some and gave them a few fun faces too go along. And for those who remember it, I HAD to add the classic “No Signal” screen as well! Around the time I started this design, there were also some requests for a certain very specific bomb, and while that idea might still be brewing… it did inspire a punny twist—a 💩 screen for a little $#!% Show option! 😄

Hope you have fun with these! 📺📡📶

This pack contains 2 unique base designs and 9 cap designs. The caps come in raised options where able. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Bambu Basic Hot Pink PLA
• Bambu Basic Turquoise PLA
• Bambu Basic Brown PLA
• Bambu Basic White PLA
• Bambu Basic Black PLA
• Bambu Basic Silver PLA
• Prusament Galaxy Black

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended) Only one wall on first layer: True (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)

Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat). For the raised caps, print them face up so you have a nice textured surface.

NOTE: I've found the best way to get the most crisp details on the flat clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error: Small Detail (Eyes, Blush) Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com