PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION ☯️🐠🪼🌊❤️🐕🐈

Hi friends!

Today’s release is extra special - no part of this pack is designed by either myself or Nick! Since starting our Patreon, we’ve been lucky to have an amazing behind-the-scenes team of friends and family helping with things like photography, admin tasks and Pawper counting. Lately, though, we’ve been feeling a bit burned out, so we’ve started bringing some of that team on in a bigger way by helping us with design. We're not going anywhere, but even when you love what you do, balance is a must!

Any-who, we’re so excited to introduce Nick’s sister, Emily, who created her very first pack for this release! I’ll let her take it from here, but please say hi and show her some love—this pack is soooo cute!

Hi everyone!

I am excited to join the Pawpular Prints team! I have designed this first pack based off of your requests! I saw yin-yang requested a few times as well as more dual clickers. I hope you like how this pack turned out! ☯️🐠🪼🌊❤️🐕🐈

-Emily :)

This pack contains a base design and 12 cap designs. The caps come in raised and flat options. The base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration. There are two placements of the 7mm and 3.5mm diameter keychains depending on what direction you want the clickers to hang.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Bambu Basic Jade White PLA
• Bambu Basic Black PLA
• Bambu Basic Orange PLA
• Bambu Basic Red PLA
• Bambu Basic Blue PLA
• Bambu Basic Gray PLA

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail
• Medium Detail
• Everything Else

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com