PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 🎉🏰

Hi!!!! We are so excited to finally share this pack—it’s such a fun one! We had a request for some bounce houses, and with outdoor parties and festivities just around the corner, we thought there’s no better time to share them with you all!

This pack is a little different from our usual designs: the top portion of the house holds our ‘base’ insert, and the bottom of the bounce house acts as the ‘cap.’ We found this worked perfectly for the proportions—and honestly, we LOVE how they turned out!

Get ready to bounce into some fun—hope you enjoy! 🎉🏰

This pack contains 3 unique base designs (Top of House) and 2 cap designs (Bottom of House). We've included files with 4 color and 3 color 3mf paint jobs! Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Bambu Basic Green PLA
• Bambu Basic Savannah Yellow PLA
• Bambu Basic Orange PLA
• Bambu Basic Cyan
• Bambu Basic Purple
• Bambu Basic Pink PLA

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended) Only one wall on first layer: True (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: For the raised caps, print them face up so you have a nice textured surface.

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com