PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 🙌🐢❤️

Today we want to give a big thank-you to our friend James (aka Buckle N' Shackle) for generously letting us share his awesome turtle shell mod with all of you! We’ve always wanted to offer a slightly more realistic shell option, so when James offered up his design for these heart shells, we were incredibly grateful—and we knew it would be perfect for the community.

We’ve printed a ton of these and they’ve been sooo loved—hope you love them just as much! If you do, be sure to give James a shout-out in our Discord! We've also done a few collabs with James in the past - check them out HERE! 🙌🐢❤️

**⚠️NOTE⚠️ This Pack ONLY INCLUDES turtle cap files! **The hatchling bases can be found in our Hatching Hearts Multi-Pack and the 7-clicker heart bases can be found in Turtley Yours Multi-Pack!

This pack contains 2 unique base designs and 3 sets of cap designs.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Bambu Basic Pink PLA
• Bambu Basic Turquoise PLA
• Bambu Basic Purple PLA
• Bambu Basic Bright Green PLA
• Bambu Basic Black PLA
• Bambu Basic White PLA

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended) Only one wall on first layer: True (recommended)

Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)

Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat). For the raised caps, print them face up so you have a nice textured surface.

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com