PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

---

DESIGN DESCRIPTION 🌈🤍🏳️‍🌈

Hi everyone! With June right around the corner, we thought it was the perfect time to finally print and share DinnerSonic's Pride Hearts! I know these have been a hit on DinnerSonic's Etsy, Field of Green Prints and many of you have asked about these since he first shared them with us as a community mod. We're excited to have finally found a spare minute to finalize this collaborative pack!

We've used DinnerSonic's modified flat heart designs as the foundation for this set, and we've also created raised versions in pyramid and concave styles to complement the originals. I’m so happy with how these colorful hearts turned out and so beyond grateful for DinnerSonic's willingness to share with the community!! Hope you all love these! 🌈🤍🏳️‍🌈

This pack contains 1 unique base designs and 4 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

---

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

---

PHOTO COLORS🎨

• Red - Hatchbox True Red PLA
• Orange - Overture PLA Cream Orange
• Yellow - Hatchbox Yellow PLA
• Green - Elegoo Neon Green PLA
• Darker Blue - Overture PLA Digital Blue
• Lighter Blue / Teal - Polyterra Arctic Teal PLA
• Purple - Hatchbox Midnight Purple PLA
• Magenta-ish - Hatchbox Eggplant Purple PLA
• Pink - Hatchbox True Pink PLA

---

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat)

NOTE: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Inner Hearts)
• Medium Detail (Middle Hearts)
• Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

---

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com