tracking pixel
Devin B

OP-1 BestCase Decksaver and Stand // Interference

by
Make Anything
Follow
Follow
Remix Model
Make Anything
Make Anything
|
Image 1 of 6
OP-1 BestCase Decksaver and Stand // Interference 3d model
Make Anything
Make Anything
|
Image 1 of 6
OP-1 BestCase Decksaver and Stand // Interference 3d model
2D
3D
Makes
OP-1 BestCase Decksaver and Stand // Interference 3d model
OP-1 BestCase Decksaver and Stand // Interference 3d model
OP-1 BestCase Decksaver and Stand // Interference 3d model
OP-1 BestCase Decksaver and Stand // Interference 3d model
OP-1 BestCase Decksaver and Stand // Interference 3d model
OP-1 BestCase Decksaver and Stand // Interference 3d model
This model is restricted by licensing terms. 

Protect your OP-1 in the coolest way possible with a decked out cases! The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.


To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these Grifiti Bands (also on eBay) or these.


4 Likes1 DownloadsSeptember 18, 2023


4 Likes1 DownloadsSeptember 18, 2023
This model is restricted by licensing terms.