Momentus Mind Camera PRO // Fidget Clicker + Memory Device

The Momentus Mind Camera is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the PRO Kit, which includes a bunch of styles and options for your custom mind camera. Try out a basic kit for free here.

Printing Guidelines

Watch the attached assembly video for detailed printing and assembly instructions!

• 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.

• All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.

• Front_loose.stl part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.

• If using a softer filament or want an extra finger workout you can print the 'firm' and 'stiff' versions of the Trigger, but the standard one should work well for most cases.

• For the multicolor version of the back, make sure to use the correspondening strap type ('noStrap','StrapA', or 'StrapB') for both the face and main STLs.

• Designed to work with my printable Keychain Loop or any standard keychain.

• No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest E6000.

Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA.*

These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.