A nice general purpose cleaning brush and dust pan set to keep your place tidy! This large variation has a brush that is roughly 180 mm wide with 95 mm bristles. The dust pan is 215 mm wide.
Printing Guidelines
Printing the brush requires a well tuned printer and proper slicer settings to successfully create the long bristles using bridging. I suggest a 0.4mm nozzle and Classic rather than Arachne wall generator. Slow bridge speed, high cooling, and lower extrusion temperatures can all help get clean bridging. You may want to first print the smaller Detail Dusting Brush to make sure your settings are appropriate before trying this larger print.
The handles should be fine with your default print settings. Six 6 mm x 3 mm neodymium disc magnets can be glued into the handles so they stick together for storage (make sure to get the magnet polarities right!)
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab Marble PLA and Purple ABS.* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!