CORRUGA Square Bowl // Large
This stunning square bowl can appear both very solid or almost ethereal depending on the viewing angle. There are some steep overhangs but a well tuned printer and good filament makes it work!
Printing Guidelines
Print solid without supports using a 0.4mm nozzle to ensure that each wall is exactly 2 shells. 0.12mm layer height for cleaner overhangs, or 0.16mm to save time.This large bowl is 227mm x 227mm x 145.35mm, just fitting on the BambuLab X1/P1 build surface. 'Classic' wall generator works well and 'Arachne' may crash your Slicer on this demanding model..
3 Versions are included. 'Bottom Edge' has a bottom outline to help with bed adhesion. 'Dual Edge' includes both a bottom and top outline to improve part strength. 'No Edge' is the most challenging to print and has delicate top edges, but includes only the corrugated lattice (as photographed).
Find the smaller CORRUGA Dish here.
Photographed model was printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA Silk Dual Color (Blue Hawaii).* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!
CORRUGA Square Bowl // Large
Gutter Guard // Rain Gutter Debris Filter
EZPZ Screwdriver Bit Clip
IKEA FLISAT Bench TPU Feet // Floor Protector + Grip
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protector + Grip
Sink Brush Hanger // TPU Brush Loop Kitchen Organizer
SHIMMER 03 Planter
SHIMMER 02 Planter
SHIMMER 01 Planter
Gotta say, huge thumbs down. By far the worst soup bowl i've ever used.
Thanks for your feedback! For soup I would recommend using this bowl in zero gravity so capillary action can keep the broth in place <3
Unfortunately, after 19 hours of printing the bottom corners began to lift off of the plate and warp. Any idea why this happens? I printed on a Bambu Lab A1 with transparent PETG, using the Smooth PEI High Temp plate which normally has super strong adhesion. Any tips are appreciated!