This is an attachment for [The Rail](https://thangs.com/designer/LoftedGoods/3d-model/The%20Rail-1144868) that allows you to attach any of my existing planters (except the Heywood, will be updating that one soon).

All of my wall mounted planters come in two sizes (2.75" and 4.5"). I've included attachments for both sizes.

**Supports**
None needed!

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the dowel and sliding dovetail on the planters.

**Orientation**
Both attachments should print upright, with the flat part on the build plate. The set screws print with the threads facing up.

**Print Settings**
.2mm layer height
15% grid infill (99% for set screws)
2 walls

**Filament & Hardware**
Filament: Bambu Lab Ivory White Matte PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Sliding Dovetail Attachment for The Rail

Sliding Dovetail Attachment Large.stl

This is a refined version of the [Modular Wall Light](https://thangs.com/designer/LoftedGoods/3d-model/Modular%20Wall%20Light-1122599). I've created a collection for this since I'll be adding a bunch of new attachments. Everything will be available in [The Rail collection here](https://thangs.com/designer/LoftedGoods/collection/The%20Rail-73338).

Two main updates:
1. Set screws now have larger threads that should hold up better over time and screw in easier.
2. Decreased the thickness of knob on the set screws.
2. Planters have been updated with a more refined shape instead of just a cylinder.

I'll be updating previous attachments with the new threads, but they all still fit a 1" dowel, so if you've already printed parts from the Modular Wall Light or the [Tap Task Lamp](https://thangs.com/designer/LoftedGoods/3d-model/Tap%20Task%20Lamp-1115015), you can still use them!

This is designed to be used with a 1" (or 25mm) dowel, but I've also included a printable dowel that prints in two parts and threads together.

It mounts to the wall with two #8 - #10 x 1" screws spaced 16" apart vertically if using the 3D printed dowel, or 34" apart if using a standard 36" wood dowel. The wall mount collars fit onto the screws with keyhole slots.

A couple notes for successful printing:
- The set screws should be printed with a 99% infill

**Supports**
None needed!

**Scaling**
I wouldn't recommend scaling anything on this one since it's all designed to fit together.

**Orientation**
Everything prints upright with its bottom on the build plate.

**Print Settings**
.2mm layer height
15% grid infill (99% for the set screw)
2 walls

**Filament & Hardware**
Filament: Bambu Lab Ivory White Matte PLA
Hardware: Everything can be found in my Amazon Storefront at the link below.
- Ribbed Wall Anchors #8-#10 1-Inch with Screws 100-Pack, White, Plastic Anchor for Drywall/Concrete, Pan Head Phillips Screw Included

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

The Rail

The Rail.3mf

Set Screw for 25mm Dowel.stl

An adjustable task lamp that can slide up and down as well as swivel 360 degrees. This uses a rechargeable, magnetic tap light (link is in my Amazon Storefront). The light comes with a magnetic disc that sticks to the inside of the light housing.

I've included two bases, a short one and a tall one that prints in two parts and threads together.

A couple notes for successful printing:
- The set screw should be printed with a 99% infill
- The swivel light housing prints in place. The default seams will want to be placed on the inside corners of the swivel mechanism. I'd recommend painting your seams somewhere else to allow a clean gap on the swivel mechanism.

**Supports**
Tree supports are needed for the USB-C charger opening. Supports are not necessary for the threaded hole on the set screw.

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the tap light.

**Orientation**
The light housing print upside down. The base, extension rod, and set screw print upright.

**Print Settings**
.2mm layer height
15% grid infill (99% for the set screw)
2 walls

**Filament & Hardware**
Filament: Bambu Lab Ivory White Matte PLA
Hardware: Tap lights can be found in my Amazon Storefront at the link below. This is the exact Amazon listing name - DAZZY DOT Rechargeable Puck Lights 2 Pack, Magnetic Tap Light 1000mAh Battery Powered, Warm Yellow，Dimmable Touch Light Stick on for Closet, Locker, Cabinet, Bedside, Kitchen

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://bento.me/loftedgoods

Tap Task Lamp

Tap Task Lamp.3mf

Full Round Tray.stl

Grow Light.stl

Pencil Cup.stl

Pot 2.75.stl

Rod Female.stl

Tray 2.75.stl

Collar Ball + Socket.stl

Collar Long.stl

Base Short.stl

Base Threaded.stl

Tap Light Housing Ball + Socket.stl

Tap Light Housing PIP.stl

A modular wall light with multiple attachments (more coming soon!). Can also be used with a 1" (or 25mm) dowel. Current attachments:
- Pendant light socket housing (can be used with a normal 9W LED bulb or a 9W LED grow bulb)
- Small planter
- Rechargeable tap light housing
- Pencil cup

It mounts to the wall with two #8 - #10 x 1" screws spaced 16" apart vertically. The wall mount collars fit onto the screws with keyhole slots.

A couple notes for successful printing:

- The set screws should be printed with a 99% infill
- The tap light housing can either print in place or you can use the ball and socket version. If using the print in place version, the default seams will want to be placed on the inside corners of the swivel mechanism. I'd recommend painting your seams somewhere else to allow a clean gap on the swivel mechanism.

**Supports**
Tree supports are needed for the USB-C charger opening on the tap light housing. Supports are not necessary for anything else.

**Scaling**
I wouldn't recommend scaling anything on this one since it's all designed to fit together.

**Orientation**
The light housing print upside down. The base, extension rod, and set screw print upright.

**Print Settings**
.2mm layer height
15% grid infill (99% for the set screw)
2 walls

**Filament & Hardware**
Filament: Bambu Lab Charcoal Matte PLA
Hardware: Everything can be found in my Amazon Storefront at the link below.
- Tap lights - DAZZY DOT Rechargeable Puck Lights 2 Pack, Magnetic Tap Light 1000mAh Battery Powered, Warm Yellow，Dimmable Touch Light Stick on for Closet, Locker, Cabinet, Bedside, Kitchen
- Pendant light kits - SLYYMY 3Pack Plug in Hanging Light Kit, E26/E27 Vintage Hanging Lights with Plug in Cord, Retro Pendant Light Kit, 12FT Cord with On/Off Switch UL Listed, Plug in Pendant Light Cord for Hanging Light(Black)
- Grow lights - mfxmf 4 Pack LED Grow Light Bulb A19 Bulb, Full Spectrum Plant Light Bulb, 9W E26 Grow Bulb Replace up to 80W, Grow Light for Indoor Plants, Flowers, Greenhouse, Indore Garden, Hydroponic

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

The Rail

Categories:

Models in this collection

Sliding Dovetail Attachment for The Rail

The Rail

Tap Task Lamp

Modular Wall Light