Brian H

Modular Wall Light

by
LoftedGoods
Follow
Follow
Remix Model
LoftedGoods
LoftedGoods
|
Image 1 of 9
Modular Wall Light 3d model
LoftedGoods
LoftedGoods
|
Image 1 of 9
Modular Wall Light 3d model
2D
3D
Makes
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light 3d model
Modular Wall Light - Absolutely beautiful light. Getting the cord to go through the rod requires something of a hat trick; would also suggest making the set screws have a shorter head, to allow spacing the planter further down. Used a different, 10W led grow light. - 3d model

A modular wall light with multiple attachments (more coming soon!). Can also be used with a 1" (or 25mm) dowel. Current attachments:

  • Pendant light socket housing (can be used with a normal 9W LED bulb or a 9W LED grow bulb)
  • Small planter
  • Rechargeable tap light housing
  • Pencil cup

It mounts to the wall with two #8 - #10 x 1" screws spaced 16" apart vertically. The wall mount collars fit onto the screws with keyhole slots.

A couple notes for successful printing:

  • The set screws should be printed with a 99% infill
  • The tap light housing can either print in place or you can use the ball and socket version. If using the print in place version, the default seams will want to be placed on the inside corners of the swivel mechanism. I'd recommend painting your seams somewhere else to allow a clean gap on the swivel mechanism.

Supports Tree supports are needed for the USB-C charger opening on the tap light housing. Supports are not necessary for anything else.

Scaling I wouldn't recommend scaling anything on this one since it's all designed to fit together.

Orientation The light housing print upside down. The base, extension rod, and set screw print upright.

Print Settings .2mm layer height 15% grid infill (99% for the set screw) 2 walls

Filament & Hardware Filament: Bambu Lab Charcoal Matte PLA Hardware: Everything can be found in my Amazon Storefront at the link below.

  • Tap lights - DAZZY DOT Rechargeable Puck Lights 2 Pack, Magnetic Tap Light 1000mAh Battery Powered, Warm Yellow,Dimmable Touch Light Stick on for Closet, Locker, Cabinet, Bedside, Kitchen
  • Pendant light kits - SLYYMY 3Pack Plug in Hanging Light Kit, E26/E27 Vintage Hanging Lights with Plug in Cord, Retro Pendant Light Kit, 12FT Cord with On/Off Switch UL Listed, Plug in Pendant Light Cord for Hanging Light(Black)
  • Grow lights - mfxmf 4 Pack LED Grow Light Bulb A19 Bulb, Full Spectrum Plant Light Bulb, 9W E26 Grow Bulb Replace up to 80W, Grow Light for Indoor Plants, Flowers, Greenhouse, Indore Garden, Hydroponic

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods


587 Likes378 DownloadsAugust 19, 2024


587 Likes378 DownloadsAugust 19, 2024