This is a refined version of the Modular Wall Light. I've created a collection for this since I'll be adding a bunch of new attachments. Everything will be available in The Rail collection here.

Two main updates:

1. Set screws now have larger threads that should hold up better over time and screw in easier.
2. Decreased the thickness of knob on the set screws.
3. Planters have been updated with a more refined shape instead of just a cylinder.

I'll be updating previous attachments with the new threads, but they all still fit a 1" dowel, so if you've already printed parts from the Modular Wall Light or the Tap Task Lamp, you can still use them!

This is designed to be used with a 1" (or 25mm) dowel, but I've also included a printable dowel that prints in two parts and threads together.

It mounts to the wall with two #8 - #10 x 1" screws spaced 16" apart vertically if using the 3D printed dowel, or 34" apart if using a standard 36" wood dowel. The wall mount collars fit onto the screws with keyhole slots.

A couple notes for successful printing:

• The set screws should be printed with a 99% infill

Supports None needed!

Scaling I wouldn't recommend scaling anything on this one since it's all designed to fit together.

Orientation Everything prints upright with its bottom on the build plate.

Print Settings .2mm layer height 15% grid infill (99% for the set screw) 2 walls

Filament & Hardware Filament: Bambu Lab Ivory White Matte PLA Hardware: Everything can be found in my Amazon Storefront at the link below.

• Ribbed Wall Anchors #8-#10 1-Inch with Screws 100-Pack, White, Plastic Anchor for Drywall/Concrete, Pan Head Phillips Screw Included

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods