Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3774855.
UPDATE: V2 Case Top has an extra 1mm clearance for the back side of the USB ports.
This Raspberry Pi case is for the brand new model 4B. This case is low profile and also features multiple sets of holes on the bottom surface to allow Zip ties to be threaded through for easy mounting (I recommend putting the zip ties in before installing the Pi). Also, this case allows the Pi to be snapped in without the need for additional hardware. The opening for the GPIO pins will also accommodate a standard notched 40-pin ribbon cable connector. The square hole in the top of the case (above the Pi's CPU) is sized to allow a heat sink to protrude through the case. It's best to stick the heat sink to the CPU after assembly, through the hole in the lid, since the tolerances are tight.
Here's a link to the heat sinks that I used on my Pi4B:
https://www.canakit.com/raspberry-pi-4-heat-sinks.html
The Adafruit 15✖️15✖️15mm heat sink will work as well, but sticks up pretty high out of the case.
<p><a rel="nofollow" href="https://ko-fi.com/john_u"><img src="https://i.imgur.com/KjJjavu.jpeg" alt="Buy Me a Coffee at ko-fi.com" width="71" height="53" title="Buy Me a Coffee at ko-fi.com"></a></p>