Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2995849.

Wanted to finally print something large, so what better model than the Skully, as a bowl! Now I have a Skully full of Skullys! 

Modified the original design to accommodate the larger print size. Some of the features wouldn't print correctly otherwise. One thing to note is that I exported a higher resolution STL file to upload for this listing. You can see in the images that the resolution was too low initially. Wish I had of done that before printing, oh well. I might print another one someday.

Happy printing!


Update: I have included a solid model file (vMode) for those of you that would like to run this print in vase mode.

Skully Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3769559.

I've been a fan of Legos for years, and when I saw others printing large scaled Lego models, I figured I would have a go at it. Lego just came out with new City Space themed sets. I saw the robot in this set - https://www.lego.com/en-us/themes/city/products/rocket-assembly-and-transport-v29-60229 - and thought it would be perfect as a first attempt.

The files are at 100% (no scaling) so you can scale your's to whatever size you may want. I printed my at 400%. The face was laser printed on sticker material. The file for this is scaled to 400% so you will need to scale that down if needed.

I make no claim to the accuracy of any of the pieces. Fitting will be based on the accuracy of your printer. Good luck and enjoy!!

Lego Like City Space Robot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3363307.

This is a redesign of the Prusa i3 MK3 Full Bear Upgrade z top supports to accept a 688 bearing. I haven't finished the upgrade yet so the parts haven't been verified for alignment, nor have the clearances been checked. Wanted to get it out for the community to use. If you print it before I can, let me know if everything lines up.

I've included the .f3d, .step and .stl formats. If you use Fusion 360, the .f3d file has part already mirrored. If you don't use Fusion 360, just mirror the .step file.

Update June 2019: I added the files for the MK2/2.5 upgrade as well. All have been printed and test and working well. Enjoy!

Z Top with 688 Bearings for Prusa i3 MK3 Full Bear Upgrade 2.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4730580.

This is my version of the Lab ATX Power Supply. I've included a couple of variations of the panel frame vent holes. I also included blank panels for you to design your own layout. Enjoy!

Benchtop ATX Power Supply

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3830918.

I found this design on printabrick.org and decided to redraw it so that I could make it larger. However, I don't think it's based on a real Lego brick. Please correct me if I'm wrong, but I couldn't find it.

Anyway, it makes a perfect little desktop trash bin. I printed mine at 450%, which is the max area available on my Prusa MK2.5s.

Enjoy!

Lego Style Trash Bin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2954191.

My wife is an educator for our local school system. She came across this puzzle at a seminar she attended and asked me to make one. So I did. Enjoy.

Tower of Hanoi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3419499.

A simple dice design. Yes, I know, my print is terrible. Filament issues.
Enjoy!

Simple Dice Design

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2954166.

This is a fun item that I designed to print color samples of filament. Was thinking about designing hat, helmets, etc. to decorate it. Would love to see what others can come up with. The skull is 2" in diameter. Enjoy!

Update: 
So the 2" version was a little large for print samples, so I uploaded two other sizes, 1" and 1.5". The 1.5" version is what I am using for filament testing, but I will be designing hats and helmets for the 2" version in the future. Maybe.

Update 7/16/18: I refined the design a bit and uploaded higher resolution files. If you have download before now, I suggest downloading again.

Skully

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2964645.

These are the same beads that I designed for my Begleri, just printed and used differently. Designed to use with #95 paracord. You can either feed the paracord through the zipper, like I did in the picture, or you could slip it around and through itself (if that makes sense).

The Begleri listing can be found here: https://www.thingiverse.com/thing:2964562


Zipper Pulls

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2964562.

I saw a video of someone flipping some Begleri around, so I decided to try and make some. Here are a few designs that I came up with. They were designed to work with #95 paracord, but I'm sure you can resize them for a different grade paracord. The #95 is what I had on hand, so that's what I used. 

The Begleri need to be a little heavy, so make sure you print at 100% infill. This will 1) give it the weight it needs and 2) keep them from shattering when you inevitably drop them on your tile floors!

There are a lot of good videos on YouTube that you can get tips and learn tricks from. Would start there if you are interested. Enjoy!

Update: I've tested this print with the following paracord sizes and they all work well:
- 95 (really too small for adult, might be okay for child)
- 275 (works well)
- 325 (feels the best to me, but I have large hands)

Begleri Beads

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4750258.

I needed a cover for my 7" touch display I bought on Amazon for my Raspberry Pi 3 B+. I couldn't really find a good case so I decided to make one. I wasn't sure at what angle I was going to want the display, so I designed the feet to be reversable. I included angles of 15 deg. and 30 deg. Just flip it to the other side of the case to switch angles. I also included zip tie mounts in the feet for cable management. I used a 6" HDMI and USB cables with right angles to reduce cable strain.

The case bottom has VESA mounts to allow the use of any Pi case that has 75mm VESA mounts. The case I used was the Raspberry Pi 3 B Case from jayftee (https://www.thingiverse.com/thing:1427797). It's a good case design, and fits well.

Display I bought: 
Kuman 7 Inch Touch Screen Display 1024x600 - https://www.amazon.com/gp/product/B01F3801A2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Cables I Used: 
HDMI - https://www.amazon.com/gp/product/B01MYWAHCI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
USB - any with a 90 deg angle

Hardware Fasteners: 
M3 x 8mm - to mount the case to the back
M3 x 30mm - to mount case and feet together

7" Touch Display Case for Raspberry Pi 3 B+

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2964738.

I created some zipper pulls, found here: https://www.thingiverse.com/thing:2964645. These worked so I decided to make Skully Pulls. Jus like the others, this is designed to use with #95 paracord. 

These are the same exact beads used in the Skully Begleri, found here: https://www.thingiverse.com/thing:2964708

Update 7/16/18: I refined the design a bit and uploaded higher resolution file, which is probably over-kill for this but oh well. If you have download before now, I suggest downloading again.

Skully Pull

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2964708.

I saw a video of someone flipping some Begleri around, so I decided to try and make some. Here are a few designs that I came up with: https://www.thingiverse.com/thing:2964562. They worked out so the next logical step was obvious, Skully Belgeri. 

Like the others, the Skully Begleri were designed to work with #95 paracord, but I'm sure you can resize them or make larger holes for a different grade paracord. 

The Begleri need to be a little heavy, so make sure you print at 100% infill. This will 1) give it the more weight and 2) keep them from shattering when you drop them on your tile floors!

Have fun with these!

Update: I've tested this print with the following paracord sizes and they all work well:
- 95 (really too small for adult, might be okay for child)
- 275 (works well)
- 325 (feels the best to me, but I have large hands)

Update 7/16/18: I refined the design a bit and uploaded higher resolution file, which is probably over-kill for this but oh well. If you have download before now, I suggest downloading again.

Skully Begleri

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2982069.

My wife is an educator for our local school system. She came across this puzzle at a seminar she attended and asked me to make one. So I did. It's based on a PDF (in the files) that I found on the interwebs. The PDF includes instructions on how it's made and a sheet of other shapes to try your hand at.

Spoiler Note: if you don't want to know the solution, check out the attached PDF after you have solved it!

Enjoy.




Classic "T" Puzzle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3347925.

These are bins that fit the Harbor Freight 20 bin portable storage case. I did not design the small foot, as the bins that come with it have. They don't really work anyway, seemed kinda useless. I'm sure I'll be designing more variations later.

They aren't thick so there will be no infill, just set your walls to 4-5. I noticed after printing them that the fit is a little tight. Adjust as needed.

Here is the link to the HF case:
https://www.harborfreight.com/20-bin-medium-portable-parts-storage-case-62778.html

I also designed up bins for the HF 8 bin storage case, which can be found here:
https://www.thingiverse.com/thing:3347927

Bins for Harbor Freight 20 Bin Portable Storage Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3036961.

This is the first in a series of accessories for Skully, found here:

https://www.thingiverse.com/thing:2954166

This was designed for the 2" version, but I'm sure you could scale it for the smaller sizes. Make sure to use supports cause printing was a little tricky. It took a couple of attempts to get it to print right. The nose piece, before reaching the top, is only held in place by the supports. So make sure you pay attention to this when slicing. Scaling it will be extra tricky, I'm sure

Would like to see what others come up with as well. Enjoy!

Gladiator Helmet for Skully

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3583147.

This is just a simple handle I designed up for a chamfer bit to use on my prints. The handle is 75mm long and 20mm in diameter. The bit cavity is for the 20mm longer hex bit shanks only. You will have to adjust the hex slot to use the shorter bits. Enjoy!

Hex Bit Handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5078611.

Here is my version of the Mount A to fit a Ender 3 Max and CR-10. They share the same Y carriage plate. Too save to tooling costs, Creality reused the CR-10 plate for the E3 Max. Enjoy!

Ultimate Ender 3 Max / Cr-10 Bed Leveling Knob Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4797244.

This is a self-centering 1/4" dowel drilling jig I designed up for a specific project. Works really well for boards 1" thick or less. Uses a 1/4" ID x 3/8" OD x 1/2" long metal spacer for guiding the drill bit. It's a tight press fit, depending on your printer's tolerances.

This is the spacer I used:
https://www.lowes.com/pd/Hillman-5-Count-0-250-in-x-3-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012470

Enjoy!

1/4 inch Centering Dowel Drill Jig

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2927332.

This is a 1/4" doweling jig that I created to help me through a project build. It was designed to work on 3/4" plywood or MDF, but I'm sure you can easily change that. I looked into commercially made jigs but they were all too expensive. So I decided to print my own!

You will need the following from the big box store, or off the interwebs (your choice):
2 - #6 x 1" machine screws
2 - #6 hex nuts
1 - 3/8" OD x 1/4" ID x 1/2" long metal spacer/bushing (steel or bronze should work)

I printed mine with the sides that would be facing the inside of the jig on the bed as to have them as flat as possible. The spacer should be a nice, tight press fit, but if it's loose, super glue should help do the trick. Once assembled, use a your 1/4" drill bit to finish drilling the hole in the dill plate. Then use a knife or the like to clean up the tear out. Done.

Hope you guys find this useful. It worked great for me and saved me about $60! Enjoy! 




Doweling Jig

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3347927.

These are bins that fit the Harbor Freight 8 bin portable storage case. I did not design the small foot, as the bins that come with it have. They don't really work anyway, seemed kinda useless. I'm sure I'll be designing more variations later.

They aren't thick so there will be no infill, just set your walls to 4-5. I noticed after printing them that the fit is a little tight. Adjust as needed.

Here is the link to the HF case:
https://www.harborfreight.com/8-bin-portable-parts-storage-case-93927.html

I also designed up bins for the HF 20 bin storage case, which can be found here:
https://www.thingiverse.com/thing:3347925


Bins for Harbor Freight 8 Bin Portable Storage Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4730561.

This is just a remix to allow Malolo's screw-less case to be mounted on the back of the monitor via it's standard VESA mounting holes. Great case! Thanks for posting.

Raspberry Pi 3 B+ case bottom with VESA mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2816872.

This is a checker that I designed to go with the Mininalist Chess Set found here: https://www.thingiverse.com/thing:2552392 

I printed them at 60% to fit the chess board that I created. That can be found here:  https://www.thingiverse.com/make:454745

The idea is that you use the flat sides to start, turn them to the crown side when "king"ed. I think they fit well with the original chess set design.

I also created a tray to put the checkers in, which can be found here: https://www.thingiverse.com/thing:2824578

Checkers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2808678.

This is a foot that I designed for a chessboard. The board is 10" x 10" and is made of Maple and Peruvian Walnut. The squares are 1.25". There is a through hole for mounting the foot to the board with a #6 screw.

Chess Board Foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4484502.

This is just a remix to allow Malolo's screw-less case to be mounted on the back of the monitor via it's standard VESA mounting holes. Great case! Thanks for posting.

Raspberry Pi 4 case bottom with VESA mount (Remix)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2824578.

This is a tray that I designed to put checkers in and keep close to the board. The checkers can be found here: https://www.thingiverse.com/thing:2816872.

It was designed to match the feet of the board I created, which can be found here: https://www.thingiverse.com/thing:2808678.

Checkers Tray

#3DPNSpeakerCover This is another cover design for the #3DPNSpeakerCover contest.

#3DPNSpeakerCover Circles Are Great

#3DPNSpeakerCover​ with branding. Wanted to include 3DPN on the cover somewhere, so I added it subtlety to the bottom.

#3DPNSpeakerCover​ Submission with 3DPN text

3DPNSpeakerCover​ Submission with 3DPN text

#3DPNSpeakerCover​ This is my submission for the #3DPNSpeakerCover​ contest. I wanted to keep with the simple geometric shape of the cabinet.

#3DPNSpeakerCover​ Submission

#3DPNSpeakerCover​ 

This is my submission for the #3DPNSpeakerCover​ contest.

3DPN Speaker Cover.stl

Designer, Maker, Tinkerer! Rundown of my shop: CNC Router Parts 4896, Full Spectrum Laser Pro 24x16, two Prusa i3 MK3S, a Prusa i3 MK2.5S,  and other fabrication tools.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

armourcraft

Skully Bowl

Lego Like City Space Robot

Skully Bowl

Z Top with 688 Bearings for Prusa i3 MK3 Full Bear Upgrade 2.0

Benchtop ATX Power Supply

Lego Style Trash Bin

Tower of Hanoi

Simple Dice Design

Skully

Zipper Pulls

Begleri Beads

7" Touch Display Case for Raspberry Pi 3 B+

Skully Pull

Skully Begleri

Classic "T" Puzzle

Bins for Harbor Freight 20 Bin Portable Storage Case

Gladiator Helmet for Skully

Hex Bit Handle

Ultimate Ender 3 Max / Cr-10 Bed Leveling Knob Remix

1/4 inch Centering Dowel Drill Jig

Doweling Jig

Bins for Harbor Freight 8 Bin Portable Storage Case

Raspberry Pi 3 B+ case bottom with VESA mount

Checkers

Chess Board Foot

Raspberry Pi 4 case bottom with VESA mount (Remix)

Checkers Tray

#3DPNSpeakerCover Circles Are Great

#3DPNSpeakerCover Submission with 3DPN text

#3DPNSpeakerCover Submission

armourcraft

Skully Bowl

Lego Like City Space Robot

Skully Bowl

Z Top with 688 Bearings for Prusa i3 MK3 Full Bear Upgrade 2.0

Benchtop ATX Power Supply

Lego Style Trash Bin

Tower of Hanoi

Simple Dice Design

Skully

Zipper Pulls

Begleri Beads

7" Touch Display Case for Raspberry Pi 3 B+

Skully Pull

Skully Begleri

Classic "T" Puzzle

Bins for Harbor Freight 20 Bin Portable Storage Case

Gladiator Helmet for Skully

Hex Bit Handle

Ultimate Ender 3 Max / Cr-10 Bed Leveling Knob Remix

1/4 inch Centering Dowel Drill Jig

Doweling Jig

Bins for Harbor Freight 8 Bin Portable Storage Case

Raspberry Pi 3 B+ case bottom with VESA mount

Checkers

Chess Board Foot

Raspberry Pi 4 case bottom with VESA mount (Remix)

Checkers Tray

#3DPNSpeakerCover Circles Are Great

#3DPNSpeakerCover​ Submission with 3DPN text

#3DPNSpeakerCover​ Submission

#3DPNSpeakerCover Submission with 3DPN text

#3DPNSpeakerCover Submission