DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Colby G
ForgeCore50K followers
Follow
ForgeCore
ForgeCore
|
Image 1 of 13
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
ForgeCore
ForgeCore
|
Image 1 of 13
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges video thumbnail
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model
Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges 3d model

Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges

6K downloads · 7 months ago · [Instructions](https://prinnit.com/ForgeCore/design/36AFLMXEabElHYuq1BMIKDJHH3L?tab=instructions&hig
This model is restricted by licensing terms. 
View license.
Description

Instructions Hardware Filaments

Magnetivy - Intermediate Ivy is a climbing plant, and now it can climb up your fridge! My Fridge is always a mess with a bunch of different ugly magnets, I wanted something that looked great, but could also organize all the stuff on my fridge. This Ivy was a great solution.

You can take the leaves off the stem to use as a single magnet, or slide things underneath the stem to hold items as well!

Prints-in-Place The stems of the ivy print in place! Thanks to some specially designed hinges. Each stem section has multiple joints allowing you to wind it back and forth on your fridge. All you have to do is add magnets.

Customizability The stems all snap together, so you can easily make your Ivy as long as you want. There are also Y branches so you can branch off your vine in multiple directions, just like the real thing!

Want to Print the Morning Glory Version? Click Here

Tags:

Community Makes (32)
Looks outstanding :)
Thank you so much for this beuatyful Ivy :-) It was really fun to print :-D and ot looks really good in our alcove. It took about 385 magnets to make :p It is fixed to small magnets in the acoustic panels :-) We simply love it :-D
Make by user
Sorry, this is not actually a make, but a screenshot to demonstrate what I'm referring to.
Is there a way to not have it see through to the magnet hole.
I really love this print! I did have issues with the stem but it’s down to the filament I used which was a wood PLA - it printed stringy and the horizontal joints would snap instead of hinging correctly. Lesson learnt and won’t be buying that filament again! I’ll reprint the stems at a later date and add more leaves ☺️
These are by far the COOLEST fridge magnets Ive ever seen or made. I love how you can actually interconnect them with your over flowers and leaves also if you wanted too. I do find I have to glue ever magnet in otherwise they just come right out so it does take a lot of work. Idk if its just me but I have trouble keeping the magnets in the same orientation. I would like to sell these as sets and then maybe make a 6 pack of flowers or different leaves as a separate addition pack but im worried I will get the magnets wrong and then they wont work if I make them say at a different time. If anyone has any tricks or tips I would greatly appreciate your input! Also, I do appreciate when ForgeCore adds the "you should sell this item for X -X amount" like with your planet lamps. That does help as a seller to know where to even start with a price point. I love all of your designs and if you eventually added different "extended packs" to add to these stems for say holidays or seasons or even just different flowers etc. I think that would be amazing! Thank you for all you do and your genius mind. I dont know how you do it but I am so glad you do. I love being able to offer useful and practical and beautiful items besides toys to my customers. I am a proud ForgeCore and Ludo supporter and I thank you both for all your hard work. Much love from Nevada!
Using the provided Bambu Labs file. I have tried multiple filament types and colors. I can't get the magnet hole to fill over all the way. Any suggestions of something to tweak?
The essential of my fridge :)
Install
Having issues with the joints fusing together while printing.
One of my favorites. Easy and quick print.
Looks great on the Fridge! Added a gecko 🦎
Make by user
Loving it!!
We Love all of your creations
Having an issue with this color for some reason.. I used both the lighter green and olive green with no issue, but this orange/red PLA+ has these gaps in the center of the leaf.. Anyone know how to fix this? Thank you in advance!
Make by user
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems
Make by user
Make by user
Make by user
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well.
Make by user
One of my favorite plants is Coleus 'Black Dragon', so I tried to color these leaves to look like that plant. I think these turned out amazing! So many different color options you can do with this print.
Make by user
Make by user
Make by user
So excited to keep expanding this! The muted white for the vine might be a little pale but the forest green and bright green for the different leaves, using mint green for the creases came out great!
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :)
These printed perfect for me right off of the 3mf. I’m obsessed!
So cute! This is gonna be so nice to have on my workbench!
Looks outstanding :)
Thank you so much for this beuatyful Ivy :-) It was really fun to print :-D and ot looks really good in our alcove. It took about 385 magnets to make :p It is fixed to small magnets in the acoustic panels :-) We simply love it :-D
Make by user
Sorry, this is not actually a make, but a screenshot to demonstrate what I'm referring to.
Is there a way to not have it see through to the magnet hole.
I really love this print! I did have issues with the stem but it’s down to the filament I used which was a wood PLA - it printed stringy and the horizontal joints would snap instead of hinging correctly. Lesson learnt and won’t be buying that filament again! I’ll reprint the stems at a later date and add more leaves ☺️
These are by far the COOLEST fridge magnets Ive ever seen or made. I love how you can actually interconnect them with your over flowers and leaves also if you wanted too. I do find I have to glue ever magnet in otherwise they just come right out so it does take a lot of work. Idk if its just me but I have trouble keeping the magnets in the same orientation. I would like to sell these as sets and then maybe make a 6 pack of flowers or different leaves as a separate addition pack but im worried I will get the magnets wrong and then they wont work if I make them say at a different time. If anyone has any tricks or tips I would greatly appreciate your input! Also, I do appreciate when ForgeCore adds the "you should sell this item for X -X amount" like with your planet lamps. That does help as a seller to know where to even start with a price point. I love all of your designs and if you eventually added different "extended packs" to add to these stems for say holidays or seasons or even just different flowers etc. I think that would be amazing! Thank you for all you do and your genius mind. I dont know how you do it but I am so glad you do. I love being able to offer useful and practical and beautiful items besides toys to my customers. I am a proud ForgeCore and Ludo supporter and I thank you both for all your hard work. Much love from Nevada!
Using the provided Bambu Labs file. I have tried multiple filament types and colors. I can't get the magnet hole to fill over all the way. Any suggestions of something to tweak?
The essential of my fridge :)
Install
Having issues with the joints fusing together while printing.
One of my favorites. Easy and quick print.
Looks great on the Fridge! Added a gecko 🦎
Make by user
Loving it!!
We Love all of your creations
Having an issue with this color for some reason.. I used both the lighter green and olive green with no issue, but this orange/red PLA+ has these gaps in the center of the leaf.. Anyone know how to fix this? Thank you in advance!
Make by user
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems
Make by user
Make by user
Make by user
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well.
Make by user
One of my favorite plants is Coleus 'Black Dragon', so I tried to color these leaves to look like that plant. I think these turned out amazing! So many different color options you can do with this print.
Make by user
Make by user
Make by user
So excited to keep expanding this! The muted white for the vine might be a little pale but the forest green and bright green for the different leaves, using mint green for the creases came out great!
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :)
These printed perfect for me right off of the 3mf. I’m obsessed!
So cute! This is gonna be so nice to have on my workbench!
Community Makes (32)
Looks outstanding :)
Thank you so much for this beuatyful Ivy :-) It was really fun to print :-D and ot looks really good in our alcove. It took about 385 magnets to make :p It is fixed to small magnets in the acoustic panels :-) We simply love it :-D
Make by user
Sorry, this is not actually a make, but a screenshot to demonstrate what I'm referring to.
Is there a way to not have it see through to the magnet hole.
I really love this print! I did have issues with the stem but it’s down to the filament I used which was a wood PLA - it printed stringy and the horizontal joints would snap instead of hinging correctly. Lesson learnt and won’t be buying that filament again! I’ll reprint the stems at a later date and add more leaves ☺️
These are by far the COOLEST fridge magnets Ive ever seen or made. I love how you can actually interconnect them with your over flowers and leaves also if you wanted too. I do find I have to glue ever magnet in otherwise they just come right out so it does take a lot of work. Idk if its just me but I have trouble keeping the magnets in the same orientation. I would like to sell these as sets and then maybe make a 6 pack of flowers or different leaves as a separate addition pack but im worried I will get the magnets wrong and then they wont work if I make them say at a different time. If anyone has any tricks or tips I would greatly appreciate your input! Also, I do appreciate when ForgeCore adds the "you should sell this item for X -X amount" like with your planet lamps. That does help as a seller to know where to even start with a price point. I love all of your designs and if you eventually added different "extended packs" to add to these stems for say holidays or seasons or even just different flowers etc. I think that would be amazing! Thank you for all you do and your genius mind. I dont know how you do it but I am so glad you do. I love being able to offer useful and practical and beautiful items besides toys to my customers. I am a proud ForgeCore and Ludo supporter and I thank you both for all your hard work. Much love from Nevada!
Using the provided Bambu Labs file. I have tried multiple filament types and colors. I can't get the magnet hole to fill over all the way. Any suggestions of something to tweak?
The essential of my fridge :)
Install
Having issues with the joints fusing together while printing.
One of my favorites. Easy and quick print.
Looks great on the Fridge! Added a gecko 🦎
Make by user
Loving it!!
We Love all of your creations
Having an issue with this color for some reason.. I used both the lighter green and olive green with no issue, but this orange/red PLA+ has these gaps in the center of the leaf.. Anyone know how to fix this? Thank you in advance!
Make by user
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems
Make by user
Make by user
Make by user
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well.
Make by user
One of my favorite plants is Coleus 'Black Dragon', so I tried to color these leaves to look like that plant. I think these turned out amazing! So many different color options you can do with this print.
Make by user
Make by user
Make by user
So excited to keep expanding this! The muted white for the vine might be a little pale but the forest green and bright green for the different leaves, using mint green for the creases came out great!
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :)
These printed perfect for me right off of the 3mf. I’m obsessed!
So cute! This is gonna be so nice to have on my workbench!
Looks outstanding :)
Thank you so much for this beuatyful Ivy :-) It was really fun to print :-D and ot looks really good in our alcove. It took about 385 magnets to make :p It is fixed to small magnets in the acoustic panels :-) We simply love it :-D
Make by user
Sorry, this is not actually a make, but a screenshot to demonstrate what I'm referring to.
Is there a way to not have it see through to the magnet hole.
I really love this print! I did have issues with the stem but it’s down to the filament I used which was a wood PLA - it printed stringy and the horizontal joints would snap instead of hinging correctly. Lesson learnt and won’t be buying that filament again! I’ll reprint the stems at a later date and add more leaves ☺️
These are by far the COOLEST fridge magnets Ive ever seen or made. I love how you can actually interconnect them with your over flowers and leaves also if you wanted too. I do find I have to glue ever magnet in otherwise they just come right out so it does take a lot of work. Idk if its just me but I have trouble keeping the magnets in the same orientation. I would like to sell these as sets and then maybe make a 6 pack of flowers or different leaves as a separate addition pack but im worried I will get the magnets wrong and then they wont work if I make them say at a different time. If anyone has any tricks or tips I would greatly appreciate your input! Also, I do appreciate when ForgeCore adds the "you should sell this item for X -X amount" like with your planet lamps. That does help as a seller to know where to even start with a price point. I love all of your designs and if you eventually added different "extended packs" to add to these stems for say holidays or seasons or even just different flowers etc. I think that would be amazing! Thank you for all you do and your genius mind. I dont know how you do it but I am so glad you do. I love being able to offer useful and practical and beautiful items besides toys to my customers. I am a proud ForgeCore and Ludo supporter and I thank you both for all your hard work. Much love from Nevada!
Using the provided Bambu Labs file. I have tried multiple filament types and colors. I can't get the magnet hole to fill over all the way. Any suggestions of something to tweak?
The essential of my fridge :)
Install
Having issues with the joints fusing together while printing.
One of my favorites. Easy and quick print.
Looks great on the Fridge! Added a gecko 🦎
Make by user
Loving it!!
We Love all of your creations
Having an issue with this color for some reason.. I used both the lighter green and olive green with no issue, but this orange/red PLA+ has these gaps in the center of the leaf.. Anyone know how to fix this? Thank you in advance!
Make by user
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems
Make by user
Make by user
Make by user
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well.
Make by user
One of my favorite plants is Coleus 'Black Dragon', so I tried to color these leaves to look like that plant. I think these turned out amazing! So many different color options you can do with this print.
Make by user
Make by user
Make by user
So excited to keep expanding this! The muted white for the vine might be a little pale but the forest green and bright green for the different leaves, using mint green for the creases came out great!
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :)
These printed perfect for me right off of the 3mf. I’m obsessed!
So cute! This is gonna be so nice to have on my workbench!
Discussions
Jazzy P
JazzyPlz2 years ago
So cute! This is gonna be so nice to have on my workbench!
So cute! This is gonna be so nice to have on my workbench! 3d model
PrinterBambu Lab P1P
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.2 mm
Infill density10 %
Colby G
ForgeCore2 years ago

Looks awesome! Love the way you wrapped it around the corner.

I just put my Ivy on my workbench as well lol

Kady 3
kady3dprinting2 years ago
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems
My make https://kady3dprinting.com/model/3d-printed-magnetivy---english-ivy-fridge-magnet-with-articulating-stems 3d model
LayerusRex
LayerusRex2 years ago
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well.
We love this model in our household! We are experimenting with different coloring on the leaves, inspired by the other fall themed make. The mini lady bugs are outstanding as well. 3d model
PrinterPrusa MK4 & MMU3
David S
davschall12 years ago

These leaf colors are so sick! What filament colors are you using for these?!

LayerusRex
LayerusRex2 years ago

Hey, just saw your reply, here you go:

The green leaves are IIIDMax PLA+ New Army Green IIIDMax PLA+ Forest Green Overture Olive Green

And I used IIIDMax PLA+ Vanilla Cream for the veins.

The orange leaves are IIIDMax again, Burnt Orange with Brown veins.

The orange/yellow leaves are IIIDMax Burnt Orange/Gold with…Orange or Red veins I can’t tell.

The dark red are Flashforge Marsala with IIIDMax Brown veins.

The red/green are Flashforge Marsala and Eryone Matte Black Forest Green

crazyvetfam
crazyvetfam2 years ago
3d model
L
Lohango2 years ago
3d model
3d model
William J
WQQ2 years ago
3d model
3d model
3d model
A
Akumu222 years ago

I like those colors! Do you mind sharing what filament you used for those leaves? Thanks!

PrintMa G
printmagbr2 years ago
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :)
Love the design. The magnets fit perfectly into the slots. I added a bit of superglue into the holes before inserting the magnets to secure them even better. Thanks for the fantastic model :) 3d model
3d model
3d model
3d model
3d model
PrinterBambu Lab A1
MaterialPLA
aude
aude2 years ago

bonjour comment avez vous reussi a avoir les feuilles multicolore sur la A1 merci

Cindy H
clhacko2 years ago
3d model
3d model
3d model
PrinterBambu Lab A1
TygerDad
TygerDad1 year ago

Nice print. Like the light colored leaves. Did you have any issues with the 5x3mm magnets in the ladybugs? I printed a bunch of ladybugs in PLA and the magnet openings are around 0.5 to 0.75 mm too small, due to shinkage I guess.

Graham M
matuszeg2 years ago

This design is incredible. You should make additional leaf types that serve different functions. Like a leaf that acts as a chip clip.

Cheryl W
wilsonc0022 years ago
3d model
View all 75 discussions

Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges

6K downloads · 7 months ago in 
Sculptures & Statues
 and 
Home Decor & Accessories
Colby G
ForgeCore50K followers
Follow
This model is restricted by licensing terms. 
View license.

More models

Colby G
ForgeCore
Spinny Succulents - Pack III 3d model

Spinny Succulents - Pack III

Colby G
ForgeCore
Desktop Golf Gen 2 3d model

Desktop Golf Gen 2

Colby G
ForgeCore
PlayBook'd - Playing Cards 3d model

PlayBook'd - Playing Cards

Colby G
ForgeCore
Desktop Dumpster 3d model

Desktop Dumpster

Colby G
ForgeCore
PlayBook'd Cribbage 3d model

PlayBook'd Cribbage

Colby G
ForgeCore
PlayBook'd Crosswords 3d model

PlayBook'd Crosswords

Colby G
ForgeCore
Snack Attack - Gen 2 3d model

Snack Attack - Gen 2

Colby G
ForgeCore
PlayBook'd Snakes and Ladders 3d model

PlayBook'd Snakes and Ladders

Colby G
ForgeCore
Date Night Daisy 3d model

Date Night Daisy

Colby G
ForgeCore
PlayBook'd Settlers' Storage 3d model

PlayBook'd Settlers' Storage

Colby G
ForgeCore
Scoopy Stacks 3d model

Scoopy Stacks

Colby G
ForgeCore
Butterfly Fridge Magnets - Pack II 3d model

Butterfly Fridge Magnets - Pack II

Colby G
ForgeCore
Playbook'd - Checkers 3d model

Playbook'd - Checkers

Colby G
ForgeCore
PlayBook'd - Shut the Box 3d model

PlayBook'd - Shut the Box

Colby G
ForgeCore
PlayBook'd - Hook and Ring.3mf 3d model

PlayBook'd - Hook and Ring.3mf

Colby G
ForgeCore
Paint Can Drying Rack 3d model

Paint Can Drying Rack

Colby G
ForgeCore
Mossy Mounds 3d model

Mossy Mounds

Colby G
ForgeCore
Playbook'd - Reversi 3d model

Playbook'd - Reversi

Colby G
ForgeCore
Playbook'd - Sling Puck 3d model

Playbook'd - Sling Puck

Colby G
ForgeCore
PlayBook'd - Hangman 3d model

PlayBook'd - Hangman

AboutBlog
Apps
Download ThangsThangs SyncBlender AddoniOSAndroid
Help
HelpFAQSupport
Legal
LegalTerms & ConditionsPrivacy PolicyContent Policy
Feedback