Collapsing Drill Sword Print-in-Place

**Drill Sword**
_Print-in-Place Version_

This version of the Drill Sword prints complete all as one piece. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on [how to print collapsing swords](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) on my website. If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)



Tactile Fidget Rings (spinning fun toy)

Honeycomb.stl

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Print-In-Place, No Supports, Articulating Fidget Toy

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

Tolerance:
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Extra Long Bony Basilisk:
Coming Soon
Loose Tolerance Long Bony Basilisk:
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings:
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Virgo Dragon - Articulated Dragon

VirgoDragon_BambuMulticolor_Mimetics3D.3mf

Ringchaku Spinning Fidget Toy

Christmas Chain V1.2 - Ringchaku Ring.stl

Hammerhead  Shark  Bones

Hammer shark  Full.stl

Water Dragon - Articulated dragon

Water Dragon.stl

Odon the Obsidian Lindwyrm

LFC Obsidian Lindwyrm.stl

Gift Box #7

GIFT BOX 7_ASSY REF ONLY.stl

Goku - Dragon Ball Z - Fan Art

Goku - full.stl

Crystal Dragon 2025

Cinderwing3D Crystal Dragon 2025 Colors.3mf

Universal Controller Stand - Inspired by Piccolo from Dragonball - Fan Art

Red_Green_Hand.stl

Collapsing Katana Sword

Part1.stl

Hex Bed Scraper With Hanger

Simple, lightweight, low filament cost bed scraper with a loop on the back for hanging. 

Tiny T-Rex

Cinderwing3D_TinyTREX_Color.3mf

Squish Ball Print in Place Fidget Toy

Presupported.stl

Collapsing Pirate Sword

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The sword is designed to be printed with a ,4mm nozzle, the blade will be two shells thick.

There is a file named "test print". If this works, you shouldn't have an issue. If it fuses together, I would suggest adjusting your cost and wipe settings.  For more info on how to print this, I made a trouble shooting [video.]video

If you want to throw a little support my way, please follow the affiliate links to the filament I used to make this swords.
[Silver Filament][silver]
[Pink Filament][Pink]

[silver]:https://amzn.to/2W3Z1Gh
[Pink]:https://amzn.to/3AZngnL
[Video]:https://youtu.be/YQV4PYJPhx0



Print in Place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Collapsing Drill Sword Print-in-Place

Tactile Fidget Rings (spinning fun toy)

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Virgo Dragon - Articulated Dragon

Ringchaku Spinning Fidget Toy

Hammerhead Shark Bones

Water Dragon - Articulated dragon

Odon the Obsidian Lindwyrm

Gift Box #7

Goku - Dragon Ball Z - Fan Art

Crystal Dragon 2025

Universal Controller Stand - Inspired by Piccolo from Dragonball - Fan Art

Collapsing Katana Sword

Hex Bed Scraper With Hanger

Tiny T-Rex

Squish Ball Print in Place Fidget Toy

Collapsing Pirate Sword

Drainer – Pop-Open Drain Strainer Version 2.0

Baby Axolotl Dragon

Dratini (Pokemon)- Print-In-Place Flexi