My personal Design of a Tumbler As a keychain that can hold a ChapStick, a glue stick, or other small items with a Screw Lid. Includes a Lid with a removable fidget straw that can lock into play when pulled up all the way and twisted 180 degrees. Designed with a invisible line along the handle side to try to help draw the Z Seem. No glue necessary. I use A Lobster Clap for the keychain spot these are what i have used from amazon https://a.co/d/8vqmPt5

This is not a physical item please see my etsy for a physical version.

files are in a compressed zip folder and has to be unzipped (on windows right click and unzip) Might have to unzip another folder as well. If file name is to long unzip the file closer to the Local disk (c:) or other Storage Drive. Includes Bambu studio file

Outer Size 2.09” Inch Wide. (Handle to to opposite side) 1.46” Inch Deep. 3.94 Inch Tall.

Inner Size 0.858” Inches Bottom Diameter. 1.212” Inches Top Diameter. 3.346” Inches Top to Bottom Height. 1.968” Inches Top to Mid section Height before changing to smaller diameter for the bottom.

So it can hold up to one of these sizes at a time 0.858” Inch Diameter, 3.346” Inches Tall. Or 1.212” Inches Diameter, 1.968” Inches Tall.

3D printing settings

supports enabled for each piece support under tumbler handle. outside of tumbler lid and tumblr lid line.

if using a bed slinger id recommend a brim. layer height and nozzle width to your liking of detail of the design.

ams or machine stop at layer to change for a silver color for the top of the tumbler.