〇 Design Philosophy "ARCH" is a bookstand characterized by its continuous, organic curves. Unlike rigid, angular stands, its soft silhouette adds a gentle rhythm to your desk or shelf, blending perfectly with Japandi or minimalist interiors. It is designed not just to hold books, but to frame them beautifully.

〇 About the Photos The samples in the photos were printed using PLA Matte White and PLA Matte Black. The matte texture complements the organic shape very well.

〇 IMPORTANT:Printer Size Requirements

・Minimum Build Plate Size: 256mm x 256mm or larger (e.g., Bambu Lab X1, P1, A1).

・Placement: The total width is 280mm. This exceeds the standard width of many printers. You must position the model diagonally (at 45 degrees) on the build plate to fit.

・Note: This model is too large for the A1 mini (180mm plate).**

〇 Easy Print with .3mf The included .3mf file is already pre-configured with the correct diagonal placement and settings. I highly recommend using this file for Bambu Lab users.

〇 Dimensions:

・Width: 280mm

・Depth: 118mm

・Height: 130mm

〇 Recommended Print Settings:

・Material: PLA / PLA+ / PETG (Matte PLA Recommended)

・Wall Loops: 4 lines (Essential for structural rigidity).

・Infill: 15% (Gyroid).

・Brim: Recommended.

　Depending on your environment, warping may occur at the ends. Using a brim ensures stability.

・Supports: Optional.

　It prints fine without supports. However, if you want the cleanest possible finish on the bottom curved edges (fillets), enabling supports is recommended.

・Print Time: Approx. 6 hours.

〇 Files Included

・ArchBookStand.3mf (Recommended: Pre-rotated & Settings applied)

・ArchBookStand.stl

〇 Availability & License Commercial Use: Selling finished physical prints is permitted ONLY for active subscribers of my Commercial Plan.