⚠️ IMPORTANT: This is an adapter/expansion pack. The main CHOIS Starter Kit is required and sold separately.

Upgrade your CHOIS Valet Stand with the Multi-Hook Pack! This expansion adds three new, purpose-built hooks to make your rack even more versatile:

・Round Edge Hook (& Sleeve): A wider, rounded design to protect your favorite bag straps from getting creased or damaged.

・Wavy Hook (& Sleeve): Features anti-slip grooves, perfect for securely hanging multiple tote bags or standard hangers without them sliding off.

・Snap-on Hook: A lightweight clip that snaps directly onto the rod. Ideal for keys, ID holders, and small daily accessories.

〇Rod Size Compatibility We have included both 32mm (1-1/4") and 30mm versions for the sleeves and the Snap-on Hook. Please use the .3mf or .stl files that match your wooden rod's diameter. (Note: If you are building the main stand with 30mm rods, please make sure to download the free "30mm Rod Conversion Kit for CHOIS System" separately for the main joints.)

〇Recommended Print Settings (Please Read) We have included .3mf project files (separate files for 32mm and 30mm) with all optimal settings pre-configured. If you use Bambu Studio, it should be ready to print! If you use a different slicer, please ensure the following settings are applied manually:

・Wall Loops: 4 (Crucial for strength)

・Infill: 15% (Grid)

・Supports: ON (Required for the bottom curves/fillets)

・Brim:

　　Wavy Hook Sleeve & Snap-on Hook: ON (Outer and Inner brim)

　　Wavy Hook & Round Edge Hook: ON (Inner brim only)

⚠️ Commercial License Selling finished physical prints is permitted ONLY for active subscribers of my Commercial Plan.

Happy Printing!