Give your home a unique look with contemporary 3D printable art and decor, including lamps, vases, planters, clocks, wall art, and statues.

3D Printed Art & Decor

Honeycomb Planter

A 3D Printable Honeycomb Planter.

Print time: 4.5 - 5.5 hours
Size: 9.5 x 6.6 cm (diameter x height)
Weight: 65 grams

If you have questions, please let me know. I am happy to help.

Happy printing 

3D printing settings

0.25mm layer height
0.6mm layer width / wall thickness
2 walls - 10% infill
40mm/sec print speed - 120mm/sec travel


Dog pot

Preview.stl

Voronoi Sphere Candle Holder

voronoi candle holder 15cm.stl

Light Up Flower Pot using LED Strips

This is a fun little flower pot you can insert a 10-12mm LED strip into.  You can also build the LED controller for this (or use a pre-made strip).  
https://thangs.com/designer/Makers%20Mashup/3d-model/ElectroCookie%20Enclosure%20for%20WLED%20Projects-760374?manualModelView=true&source=Recent
Is an enclosure and LED controller.  I show you step by step how to wire one. 

Some tips for the Light Up Flower Pot

1. Using a dark filament you wont get many colors but it will completely hide the LED's.  So when it lights up, youre not expecting the lights to show through. 
2. This works great outdoors as well as indoors. 
3. You can scale up the pot, but you cant scale it down since the channel for the LED's would shrink. 
4. Use a zip tie to hold down the wire in the back.  There is a groove for the zip tie in the pot. 
5. Translucent filaments will light up very well.  
6. One controller can power a few pots at lower power.  The LED's dont have to be very bright to have a huge effect. 


Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



3 little planters

Pot waffel design.stl

Simple Vase

vase.blend

Carp Vase Mode

Meant to be printed nose down in vase mode.

Connectable Vase mode Hex-Boxes with Lids

Tentacle Vase

Plant Pot Container #OutdoorThangs

Plant Plot.STL

Self-Watering Planter Addon

This is a fantastic way to turn a normal plant pot into a self-watering plant pot. To set this up, just push it into the soil and put water into it. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Retro Vase Decanter Style

Retro Vase Decanter Style evokes a mid-century modern vintage vibe aesthetic. This model is a _Vase-Mode only _print.  You can filament swap the textured area to create the effect in the images, you will need to manually enter the swaps depending on your scale and layer height. Teal & Copper is %50 scale. Burnt Titanium & Cyan Silk is %25 scale.

**Settings for 0.4 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.1mm
**Bottom Layers:** 8
**Extrusion width:** Default 0.6mm on all settings
**Perimeters Overlap:** 50%

**Settings for 0.8 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.2mm
**Bottom Layers:** 8
**Extrusion width:** Default 1.2 mm on all settings
**Perimeters Overlap:** 50%

Creative Commons License 4.0 BY-NC-ND

Mario Piranha Succulent or Plant Pot

MARIO PIRANHA PLANT POT v1.step

Low Poly Jolteon Planter

**Low Poly Jolteon  Planters **

I've only printed this model in FDM so far. No supports needed. They are currently at the MAX scale that I could fit on an Ender 5 Pro (220x220 build plate), but you can scale up or down as you please.  I've printed as small as 50% and they looked fine to hold a small succulent.  Any smaller and you might not fit anything in it!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.6 mm with no issues.
Infill/Perimeters: I personally use 10% infill with 2 perimeters and have no issues.
Supports: None

**Post-Processing/Assembly:**
None needed, but I personally spray them with a UV protective coat after printing so they retain their color longer!			
			
			
			

Candy Cane Vase (Vase/Cookie Jar/Christmas Decor) - Support Free

Top.stl

Stackable Basic Planter

I made this Planter because I needed a few and didn't want to go to the hardware store.
I would not recommend printing this in huge numbers, they are a looot cheaper to buy.
Print in PETG or anything else UV resistant if you want them to last.
The triangle holes at the side are for water. Normally, Pots sit on small ledges, but that would require an unnecessary amount of support filament. This way, water can still get inside.
#OutdoorThangs

3D Printed Art & DecorVases & Planters

Give your home a unique look with contemporary 3D printable art and decor, including lamps, vases, planters, clocks, wall art, and statues.

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Honeycomb Planter

Dog pot

Voronoi Sphere Candle Holder

View 10 new models

3 little planters

View 11 new models

vase.blend

Carp Vase Mode

View 43 new models

Tentacle Vase

Plant Pot Container #OutdoorThangs

Self-Watering Planter Addon

Retro Vase Decanter Style

View 11 new models

View 28 new models

View 10 new models

View 17 new models

Cat Pot

View 14 new models

Reversing Rope Vase