Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3604427.

Sculpted a statue of a mother holding her child in honour of Mother's Day.
You can print and gift these statues to all the mothers in your life!
Have created 2 positions - one standing and one sitting.
These were sculpted and rendered in Autodesk Fusion 360.
I tested printed them at 0.2 mm layer height, 10% infill on my CR 10s and Ender 3 Pro.
I used Cura to slice and used their Tree Supports for printing.

Mother's Day Statue

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2859021.

Designed a simple vase in Fusion 360 that would print quickly and to test out cool looking filaments.
Size is 75x75x110.
Prints quickly around 1 hour at 0.2mm height.
Edit : Simple_Vase2 had some issues with some slicers. Have added Simple Vase_Full_Solid.stl. Print in Vase mode or Spiralize Outer Contour mode in Cura. 
Remember to set Top layers as 0.

Simple Vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3573876.

A toothbrush holder stand with slots to keep 4 toothbrushes and 2 toothpastes.
Printed it on it's side and changed the filament colour midway so as to differentiate between me and my partner's side.
Rings are present below at the bottom to keep the brushes straight up
Designed and Rendered in Fusion 360.

Note : Photos are of version 1. Version 2 has thicker walls and rings at the bottom. Check the render pics of the Version 2.

Toothbrush Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3639787.

Remixed the Hardkernel ODROID-XU4Q passively cooled case with 4 screws in the top and bottom as per a request on Reddit.

Hardkernel ODROID-XU4Q passively cooled case Top and Bottom 4 screws

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4837396.

Remix of Mechanical Keyboard - SiCK-60 (60%) by FedorSosnin where the top-left+right and bottom-left+right parts have been merged as per a request on reddit.
Merged using Fusion 360.

Mechanical Keyboard - SiCK-60 (60%) Merged

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2435801.

Customized version of http://www.thingiverse.com/thing:739573

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573

Love different types of keychains and so thought should make one for myself!


Prasad Keychain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3052358.

Designed this Shivling as per a request.
Have uploaded the Shivling as a whole model and as divided into 3 parts.
You can scale down as per your printer dimensions.
Have mostly kept it as hollow to allow to instal LEDs and to save filament and print time.

Please make sure to submit a Make once you have printed this! It helps!

Update:
Noticed a issue with the file 'Design F360' where it would start printing in mid air.
Have fixed it now and reuploaded all the files.

Shivling | Pind | Lingam

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2869073.

This is a TF2 logo keychain based on the r/place logo created on Reddit.
To get the multi colour I used the 'Change Filament at Z' Cura plugin. (https://www.thingiverse.com/thing:2077884)

My printer settings were 0.2mm layer height, 0.24mm layer width.
The layer count used to change filament is as follows:
0 - Black
6 - White
8 - White
10 - Orange
13 - Yellow
16 - White

You can check and use different layers in your slicer and update the colors accordingly.

Use infill greater than 40% to get good surface finish.

Feel free to use this however please give proper credit. 

TF2 Logo Keychain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2901365.

customized with 3D Slash!
Removed the name so that people can add their custom text.
Make and share your final result!

Paw Name Tag

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3434424.

Created a illusion cube which shows the number 4.
Designed as per a request on Reddit sub-reddit:r/3Drequests.

Will upload the stand/support soon to this design.

Feedback appreciated.

Illusion 4 Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4250720.

Hook part extended by 5mm on both mounts.

AM4 - Original Retention Brackets (Cooler Mounts) - Extended

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2801611.

Tried to a MUFC one for my friend based on this Liverpool design by Tong_G (559075).
However the logo by CSD_Salzburg (1750326) did not print fused with the back correctly and had to use glue to stick.
Printed flat with logo on the upside.

Edit:
Revisiting the file and made some changes so that the little gap earlier present is now no more.
Please download the new file and print.
Happy Printing!


Manchester United Table Stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TreblePrintsStudio

Achievements

Seedling