Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

merry christmas sign xmas wall art decor

merry christmas swirl.stl

Low Poly Christmas Tree

Low Poly Christmas Tree.stl

Swirling Christmas ball

support-free-christmas-ball-1_shell_01.stl

Large Spiral Christmas Tree Topper

Spiral Christmas Tree Topper

Jack and Zero Diorama (Fanart)

Jack and Zero Diorama_Zero.stl

Kaleidoscope Easter Egg (4 Sizes)

Kaleidoscope_Egg_100%_Top_and_Bottom_8-3x2mm_Magnets.3mf

Baby Christmas Dragon

baby Christmas dragon .stl

Swirling Tree Ornament, Christmas Decor by Slimprint 

**What could be more fun than 3D printing your own Christmas decorations?**

This Additive Star ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill and a 8mm brim.

Size: 10 x 3.1 x 10 cm
Weight: 26 grams
Print time: 2h 7m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports
8 mm brim for improved bed adhesion

SWT1, Swirling Tree Ornament.stl

Christmas Tree Tealight Lamp

tree.stl

Valentine Gnome

A new Gnome has arrived for the holiday of love!

Discover our uniquely crafted Valentine Gnome model, an infusion of whimsy and pop culture that breathes life into the season of passion. With enough hearts to go around, this little guy will surely make anyone fall in love.

Intriguing and charming, this stylized Valentine Gnome is a must-have addition to your Angry Monday Gnome collection, offering a playful and fun element that appeals to gnome enthusiasts and pop culture lovers alike. Enjoy this 3D model for personal use, or gain commercial rights by joining our Enraged tier!

Explore more 3D models at thangs.com, your go-to destination for high-quality and accurate 3D models.

Christmas decorations (double color)

ALBERO GRAFICO FATTO.stl

Mummy's Head Candy Bucket

Mummy Candy Bucket.3mf

Candy Cane Egg

candy cane egg top.stl

Tulip Vase

Tulip vase.stl

Pokemon Thanksgiving Turkey Pokeball 

feathers.stl

Cathedral Christmas Finial 2024

Finial Cathedral Whole v2.stl

Festive Christmas Ornaments 4

spherical_snowflake_5.stl

Halloween door decoration 11

Halloween door decoration.
Join my membership plan and get commercial to sell the prints of all my designs.

Eid gift box remix.3mf

eid gift box remix.3mf

special occasions

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Double Diamond Christmas Ball

merry christmas sign xmas wall art decor

Low Poly Christmas Tree

Swirling Christmas ball

Large Spiral Christmas Tree Topper

Jack and Zero Diorama (Fanart)

Kaleidoscope Easter Egg (4 Sizes)

Baby Christmas Dragon

Swirling Tree Ornament, Christmas Decor by Slimprint

Christmas Tree Tealight Lamp

Valentine Gnome

Christmas decorations (double color)

Mummy's Head Candy Bucket

Candy Cane Egg

Tulip Vase

Pokemon Thanksgiving Turkey Pokeball

Cathedral Christmas Finial 2024

Festive Christmas Ornaments 4

Halloween door decoration 11

Eid gift box remix.3mf