Jigglypuff Xmas Tree Decoration - Pokemon Fan Art

Merry Christmas Tree

You can scale it up or down , you can check more of my designs on my instagram https://www.instagram.com/emx_performance/

Christmas Home Decor

CHRISTMAS BOWL SMALL.stl

Chick Dragon

Chick dragon wingless.stl

Halloween 1978 style Pumpkin

HalloweenMoviePumpkin-Body.stl

Swoop 3 Christmas Tree Topper 2024

Topper Swoop 3 v2 Whole.stl

Baby Yoda Christmas Tree Decoration No Circle

This a no circle version of the [Baby Yoda Christmas Tree Decoration](https://thangs.com/mythangs/file/547312).
In that version i removed the ball circle and there's only the Baby Yoda with a Christmas Hat.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Decoration No Circle

Penguin Singing lantern 6 of 12 Ornament

Penguin_Ornament_06of12_SparkyFace5.stl

Pumpkin Horror Ghost

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

----------------------------------------------------------

Pumpkin Horror Ghost

This ghost only comes out on halloween! These ghost come out and hunt the people who have carved them and sent them into the after life. This ghost is even more dangerous than the Werewolf ghost.

Do not cross its path unless you want to get carved. 

This ghost is pretty creepy. 

Print it with the [pedestal ](https://thangs.com/mythangs/file/422307) to keep it up right.

----------------------------------------------------------

If print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

KEEP ON PRINTING!!

Small Spider

Spiderv2.stl

Mini Candy Cane Dragon

Mini candy cane dragon.stl

FreeHeathen Card Holding Goat

A goat to hold your Christmas Cards.  Why a goat because Heathen is suborn and one of the most prolific designers on Thangs making him the goat.  

Flowery Whatsit Ornament Suncatcher

*What is it?*
This is part of a series of designs that were originally intended as Christmas tree ornaments and I later found also made great suncatchers for any time of year (when printed with transparent filament/resin). This is the second in the series to be published.

Beyond that, what is it? Well, it's kind of a snowflake pattern (5 points instead of 6), kind of a star, kind of flowery, and bears a large resemblance to gothic architecture. Mostly, it's just a cool geometric design that I enjoy looking at.

*How to Hang it*
I've included two small, well hidden loops behind one of the arms so you can tie coat thread on them and hang it up. See the detail photo included above. They are really small and very well hidden.

**Print Settings**
You shouldn't need a raft or brim. 

*Print Time*
Depending on the wall thickness, these printed in 2-3 hours for me.

*Thickness*
If you want to use these as Christmas ornaments, I recommend trying to print this with 1 line (0.4mm) walls. As a suncatcher, it looks good with 1 or 2 line walls (I prefer 2). I needed to make the walls with 2 lines (0.8mm) to get a good print from the TTYT3D Silky Orange. I set the top/bottom thickness to 0.3mm.

You probably have your printer set up to print 1.2mm walls and top/bottom thickness. Don't use those settings for this design unless you plan to use it as a paperweight. If you forget to change them, cancel the print and start over.

*Flow*
I increased the flow to 110% for the outer walls and 105% for the inner.

*Infill*
This doesn't need any infill. Seriously. Don't add it unless you want to use this as a paperweight.

*Speed*
I print the first layer at 18mm/second. That makes sure that the complicated design gets good bed adhesion without a raft or brim. It also adds less time to the print and less clean-up than using a raft or a brim. If you have a cold bed, you might need the raft or brim anyway.

For all other layers, I use:
* 30mm/second outer wall speed
* 40mm/second inner wall speed
* 60mm/second overall speed

Q-Tip and Cotton Ball Holder

Q-Tip Holder - lg.stl

MAGNETIC SCREWS

FOR INFO ONLY.3mf

Nosey Ornament

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?

See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


special occasions

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jigglypuff Xmas Tree Decoration - Pokemon Fan Art

Merry Christmas Tree

Christmas Home Decor

Chick Dragon

Halloween 1978 style Pumpkin

Swoop 3 Christmas Tree Topper 2024

Baby Yoda Christmas Tree Decoration No Circle

Penguin Singing lantern 6 of 12 Ornament

Pumpkin Horror Ghost

Small Spider

Mini Candy Cane Dragon

FreeHeathen Card Holding Goat

Flowery Whatsit Ornament Suncatcher

Q-Tip and Cotton Ball Holder

MAGNETIC SCREWS

Nosey Ornament

welcome christmas wreath wall art xmas sign decor

Easter Trio Egg Container, Fun Easter Design, Toy for Chick!

Snow Dragon

Melted Round Pumpkin