3 Slot Spice Rack Door Wall Mounted

3 Slot Spice Rack Door Wall Mounted.3mf

LMNT_coaster-rack.stl

LMNT_coasters_earth-cracked.stl

IKEA Kallax Shelf Divider

I designed this divider to split a compartment in half vertically on my [Kallax shelf](http://bit.ly/kallaX) from Ikea. This increases storage capability and it's super easy to print! I used a single shell and 5% infill with PLA on the Anycubic Chiron and it's still sturdy enough.



Requires a large print area! 330.2mm x 180.1mm x 381.0mm to be exact.

Over Door Double Hook - Strong Door Hook

Door Hook.stl

Gridfinity 4X3 Vallejo/Army Painter Paintrack

4X3 Gridfinity Vallejo/Army Painter Paintrack
Total of 20 slots

Screwless Mod for IKEA HULTARP Knife Rack

HULTARP_screwless.stl

Spool Holder

End bracket for simple spool holder/rack.
Print 2 without support.
Use two pieces ¾" PVC pipe: https://a.co/3kMfGNA

Desk Organizers Modular Stacking Set of Holders and Racks

CS128-25_240527.stl

Space Saving Hanger Alternating |- slots - BackToSchool

Hanger multi alternate.stl

Fridge Bottle Holder

fridge bottle wine 90mm.step

Paint brush rack | Hang your brushes bristles down!

See it in action: https://youtube.com/shorts/UcwQ7rw-pG4?feature=share

Dry and store your paint brushes with the bristles down! 

This rack is designed to hold your brushes with bristles down so water doesn't cause damage to the glue and wood inside the ferrule.

6-slot paint brush rack with drip tray | Extended brush sizes!

Designed to fit the whole 6-pc set of acrylic/oil/watercolor brushes.

[Brushes](https://amzn.to/45rLxSr) 
As an Amazon Associate I earn from qualifying purchases. 
Shopping through my link does NOT cost extra to you, but I may earn commission which helps support my design process so I can continue providing free 3D models to the community. Thanks for your support!

Related model:
https://than.gs/m/909082

Interested in selling physical prints? Become a member for a commercial use license!

OBSIDIAN | Knife Rack

Obsidian_KnifBlock.STL

Multi Hanger Snake Alternating - BackToSchool

This is a space saving hanger for a clothes rail.
This is a small device which you can hang you clothes on and reduce the number of hangers taking up precious space on a rail. 
Hangers can be hung on the lower levels of this design.
Great for college or uni students or even anyone who wants to save space.

Multi Hanger Snake Alternating

wooden rack | connecting pieces

connector top corner.stl

Space Saver Hanger Same Side - Multi Hanger - BackToSchool

Hanger multi all one side.stl

Paper towel holder print-in-place

Papertowelholder_0.3_left.stl

RepRack Stabilizing End Caps

**RepRack Stabilizing End Caps**
These end caps help stabilize side-to-side movement of your RepRack spool storage, no need to use Rod Clamps.  These end caps provide a nice finished look to your RepRacks.  Designed to fit snug on your ½" EMT Conduit.

**My Print Settings:**
0.3mm (any Layer Height works, these are not structural components)
NO Supports required
Print in any color, any flavor


4U 12BAY UPGRADE v1.step

I was not satisfied with the current offering of hot swap rack mount cases on a budget, so i built this!  

The STEP files are shared so you can pull what you need from this model.  I've modelled the entire 4U case so you can insert your own components when building your rig.  

I have been running this build for over 2 years and had no issues with a 100% Unraid server uptime for the past 365 days.

Note: I used [these pieces ](https://www.amazon.ca/Cablecc-2-5inch-extension-convertor-adapter/dp/B00S5WOSOY/ref=sr_1_1?crid=1XC6XQLOPCDBA&keywords=sata+couplers&qid=1671687610&sprefix=sata+coupler%2Caps%2C172&sr=8-1) to connect the SATA drives. 

I fitted mount points for 3x 120mm fans, and this is designed to have a plexiglass window mounted in front, with air being sucked from the top and bottom vents. 

My average internal case temperature under load is 37c with this configuration.

Wall Mounted Rod Rack.stl

This wall-mounted rod rack comes with a drilling guide and can be seamlessly stacked vertically. The design includes endcaps which can be stuck down with some blue tack and removed if you want to expand the system.

Download contains 3mf file with added reinforcement to the screw holes using 100% infill.

rack

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

3 Slot Spice Rack Door Wall Mounted

LMNT_coaster-rack.stl

IKEA Kallax Shelf Divider

Over Door Double Hook - Strong Door Hook

Gridfinity 4X3 Vallejo/Army Painter Paintrack

Screwless Mod for IKEA HULTARP Knife Rack

Spool Holder

Desk Organizers Modular Stacking Set of Holders and Racks

Space Saving Hanger Alternating |- slots - BackToSchool

Fridge Bottle Holder

Paint brush rack | Hang your brushes bristles down!

6-slot paint brush rack with drip tray | Extended brush sizes!

OBSIDIAN | Knife Rack

Multi Hanger Snake Alternating - BackToSchool

wooden rack | connecting pieces

Space Saver Hanger Same Side - Multi Hanger - BackToSchool

Paper towel holder print-in-place

RepRack Stabilizing End Caps

4U 12BAY UPGRADE v1.step

Wall Mounted Rod Rack.stl