Multiboard Screwdriver Holder

Multiboard Screwdriver Holder.stl

Tea bag dispenser

Body.stl

Collapsible Keychain Rack - Print in Place Keychain Rack - Prints for Sellers

Tray.stl

Print-in-place Clothes Hanger, foldable

clothes_hanger.stl

Paper towel holder

110_260.3mf

Small Mechanical Counter - Fully 3d printable

USB Drive Storage Rack (Modular, Push to Open)

USB Rack 1v00b base.stl

Flip Flop Hanger

flip flop keychain.stl

Raily – modular wall organization

Block_tri_D4_60.stl

Jewelry holder “echinata coral”

echinata_coral.stl

gridfinity twizzles rack single piece

gridfinity Twizzles Rack Upper-single piece.stl

Mushroom coat hook / hanger

Mushroom_hanger.3mf

Mushroom shelf, key holder and hook “Amanita Muscaria”

All.3mf

Mushroom magnetic key holder “Ganoderma Carnosum”

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Flipper Race Racks

Small Race Rack.stl

Cat Paw Wall-Mounted Headphones Holder

Cat_Paw_Wall_Mounted_Headphones_Holoprops.3mf

XXS XS S M L XL Paint brush rack | Great gift for artists | Watercolor / acrylic painting

paint brush rack XXS XS S M L XL_karenchaudesigns.stl

Squat Automata - Moving Sculpture

Lock_linear.stl

IKEA Kallax Shelf Divider

I designed this divider to split a compartment in half vertically on my [Kallax shelf](http://bit.ly/kallaX) from Ikea. This increases storage capability and it's super easy to print! I used a single shell and 5% infill with PLA on the Anycubic Chiron and it's still sturdy enough.



Requires a large print area! 330.2mm x 180.1mm x 381.0mm to be exact.

rack

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multiboard Screwdriver Holder

Tea bag dispenser

Collapsible Keychain Rack - Print in Place Keychain Rack - Prints for Sellers

Print-in-place Clothes Hanger, foldable

Paper towel holder

Small Mechanical Counter - Fully 3d printable

USB Drive Storage Rack (Modular, Push to Open)

Flip Flop Hanger

Raily – modular wall organization

Jewelry holder “echinata coral”

gridfinity twizzles rack single piece

Mushroom coat hook / hanger

Mushroom shelf, key holder and hook “Amanita Muscaria”

Mushroom magnetic key holder “Ganoderma Carnosum”

Towel hanger

Flipper Race Racks

Cat Paw Wall-Mounted Headphones Holder

XXS XS S M L XL Paint brush rack | Great gift for artists | Watercolor / acrylic painting

Squat Automata - Moving Sculpture

IKEA Kallax Shelf Divider