EIGER | Cutting Board Rack

Want to buy a physical 3D print of this product? Head to Trajann online store.

Meet EIGER, a stylish rack to keep your cutting boards organized and dry.

It has two 15mm slots for slim cutting boards, and a 30mm slot on the back for thicker wooden cutting boards.

It can also be used as a book holder.

Happy printing!

DIMENSIONS | W 140mm x D 110mm x H 155 mm

PRINTING | ~4h

3D PRINT SETTINGS The rack print on its side. The STL file is already oriented properly. 100% print-in-place. The racks in the pictures were printed in 0.25mm/layer.

Resolution: 0.3mm/layer or less Wall line count: 2 Infill: 20~30% Build adhesion type: ~4mm Brim Supports: None

To get the line in a different colour than the rack like on the pictures, you can modify your Gcode to schedule a filament change at the layer where the colour change happens. First, slice your model. Then, in CURA go to: Extensions > Post Processing > Modify Gcode > Add Script > Filament Change And in there you input the layer where you need the filament change to happen. Add a second Filament Change script if you want the colour to go back to the original like on the pictures. Slice your model once again so it updates your Gcode. And there you go! Ready to print!