X-ACTO Knife (Gripster) Cap

A blade cover for the [X-ACTO Gripster Knife](https://amzn.to/405Yv5V) and the [No 11 Classic Fine Point Blade](https://amzn.to/3tk2EYC). This model is a personal favorite for its rubberized barrel that provides comfort and control.

This print has a small footprint, so I recommend printing with a wide brim for better bed adhesion, but that will ultimately depend on your printer.

This cap can also be softened with a heat gun to change the size to fit a regular metal X-Acto knife and some other models.



Photographed model was printed with [MatterHackers Yellow PRO Series PLA](https://bit.ly/PRO-PLA)

Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

Coaster with ball feet

Simple easy coaster.
I wanted to print in a glass/translucent filament however I have run out but will order some more eventually!!
Prints upside down so you better get a good first layer
This was initially designed to be printed with a patterned PEI/PEO bed but mine are not coming :(

Monitor Savior // Shoe Mount Lock for SmallRig

I made this simple part to cover the opening of the cold shoe mount on my SmallRig cage. Two [M4 x 10mm screws](https://amzn.to/2ybL6RS) fasten it into place.

For [SMALLRIG NATO Rail Handle](https://amzn.to/2XtISYI) or similar.

OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

protector

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

X-ACTO Knife (Gripster) Cap

View 78 new models

View 11 new models

View 21 new models

View 20 new models

View 66 new models

View 111 new models

View 72 new models

AMS Feed Protector Button (remix)

Pocket Operator Flip Case System