Floating Drip Tray 200 mm // Plant Saucer

Floating Drip Tray 200mm diameter 80mm stand.stl

HDMI Plug

HDMIplug.stl

Print-in-Place DSLR Lens Cap (43->95mm)

58mm.STL

Floating Drip Tray 250 mm // Plant Saucer

Floating Drip Tray 250mm diameter 120mm stand.stl

Floating Drip Tray 170 mm // Plant Saucer

Floating Drip Tray 170mm diameter 60mm stand.stl

TPU Tires for BS12 PRO Desk Chair

BS12_Tire.stl

X-ACTO Knife (Gripster) Cap

A blade cover for the [X-ACTO Gripster Knife](https://amzn.to/405Yv5V) and the [No 11 Classic Fine Point Blade](https://amzn.to/3tk2EYC). This model is a personal favorite for its rubberized barrel that provides comfort and control.

This print has a small footprint, so I recommend printing with a wide brim for better bed adhesion, but that will ultimately depend on your printer.

This cap can also be softened with a heat gun to change the size to fit a regular metal X-Acto knife and some other models.



Photographed model was printed with [MatterHackers Yellow PRO Series PLA](https://bit.ly/PRO-PLA)

Coaster with ball feet

Simple easy coaster.
I wanted to print in a glass/translucent filament however I have run out but will order some more eventually!!
Prints upside down so you better get a good first layer
This was initially designed to be printed with a patterned PEI/PEO bed but mine are not coming :(

TPU Bumpers (Round)

15mm Round Bumper.stl

Pocket Operator Flip Case System

Case with hinge

OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

140mm Light Floating Drip Tray

LFT _140_60.stl

Mini Membership Card Protector (2 sizes)

minicard-protector-b-beefy.stl

Anky  Dinosaur - Articulated Version & Keychain

anky-articulated-dinosaur-keychain.stl

TPU Bumpers (Wide)

20mm x 50mm Bumper.stl

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

Pocket Rocket Tab – Soda Can Opener + Bug Cover - 8oz Can - Slim

Pocket Rocket Tab - V9.stl

Camelbak Mouthpiece Cover

I whipped up this cap to cover the mouthpiece on my [Camelbak](https://amzn.to/2CUjpPx) so it doesn't get dirty when I throw my bag around in the dirt.

As you can see I have a [mouthpiece conversion kit](https://amzn.to/2xeTn3B) that has an on/off valve and other neat features, but this print should work just fine with the standard mouthpiece. Simply take off the flexible bite valve, put this part over the tube, and put the valve back on to hold this in place.

After PETG and PET+ both failed on me after a few months of use, I've found that a flexible filament like [Fillamentum FlexFill](http://bit.ly/FlexFill) is the way to go! Pistachio Green is a great color :)

Google Pixel 6A LEANBEEF Hard Case // Flow

6A_LEAN_flow.stl

protector

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Floating Drip Tray 200 mm // Plant Saucer

HDMI Plug

Print-in-Place DSLR Lens Cap (43->95mm)

Floating Drip Tray 250 mm // Plant Saucer

Floating Drip Tray 170 mm // Plant Saucer

TPU Tires for BS12 PRO Desk Chair

X-ACTO Knife (Gripster) Cap

Coaster with ball feet

TPU Bumpers (Round)

Pocket Operator Flip Case System

OP-1 BestCase // Simple Decksaver

68 Key Cover // Embedded Print

140mm Light Floating Drip Tray

Mini Membership Card Protector (2 sizes)

Anky Dinosaur - Articulated Version & Keychain

TPU Bumpers (Wide)

Aux Headphone Jack Plug 3.5mm

Pocket Rocket Tab – Soda Can Opener + Bug Cover - 8oz Can - Slim

Camelbak Mouthpiece Cover

Google Pixel 6A LEANBEEF Hard Case // Flow