Tiny Easter Cookie Wyvern and Dragon

CW3D Tiny Easter Cookie Dragon.stl

German Shepherd - Hatchling

CW3D German Shepard Hatchling.stl

Bag Clip - Fast Print

Bag Clip.stl

Obi-Wan’s Third Collapsing Lightsaber

OBI-WAN KENOBI-NH-PNP.stl

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Baby Dumpling Dragon

CW3D Baby Dumpling Dragon Clicker Tail.stl

Pug - Hatchling

CW3D Pug Hatchling.stl

PLEIADES Round Waste Bin

Lid.stl

Rottweiler - Hatchling

CW3D Rottweiler Hatchling.stl

Print-in-Place Bag Clip

Mola 100mm v10.stl

Poodle - Hatchling

CW3D Poodle Hatchling.stl

Sleeping Dragon Articulated Keychain.stl

Auxetic Cubes // 20mm 3x3 rounded Fidget Toy

Auxetic Cubes 20mm 3x3 rounded.stl

Another Infinity Cube

Infinity Cube v1.3mf

Doberman - Hatchling

CW3D Doberman Hatchling.stl

Dumpling Dragon

CW3D Dumpling Dragon.stl

Labrador - Hatchling

CW3D Lab Hatchling.stl

Planetary Quick Container

**Planetary Quick Container**

When you hold the middle section on this container and turn the bottom section, it opens up quickly due to the planetary gears on the bottom.

**How it works**
The bottom outside is the ring gear, the outer top part is the carrier, and the inner part is the sun gear.  Rotating the bottom segment while holding the top segment results in the planetary gears rotating inner shell at a 3:1 ratio.  

**Print instructions**
It’s designed for a .4mm nozzle, .2mm layer heights, no supports at 100% but there is some bridging.  There is a 6mm hex hole in the sun gear to free up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed.

Printed on the [Muldex]( https://github.com/3dprintingworld/Mulcore) Core-XY 3D Printer. 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Print-in-Place Rising Box

Print in Place Rising Box.3mf

Articulated Dragon 26 Mesh Mayhem

Articulated Dragon 26 Mesh Mayhem.stl

print-in-place

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tiny Easter Cookie Wyvern and Dragon

German Shepherd - Hatchling

Bag Clip - Fast Print

Obi-Wan’s Third Collapsing Lightsaber

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Baby Dumpling Dragon

Pug - Hatchling

PLEIADES Round Waste Bin

Rottweiler - Hatchling

Print-in-Place Bag Clip

Poodle - Hatchling

Sleeping Dragon Articulated Keychain.stl

Auxetic Cubes // 20mm 3x3 rounded Fidget Toy

Another Infinity Cube

Doberman - Hatchling

Dumpling Dragon

Labrador - Hatchling

Planetary Quick Container

Print-in-Place Rising Box

Articulated Dragon 26 Mesh Mayhem