Lego Bust (Iron Man) Wall Mount

This fits the base of all the busts I own perfectly. Leaving just enough clearance behind the bust to ensure most if not all bust will fit mount.

FHW:: Lightweight Webcam Mount

Fhw_ _Web Camera mount v1.1 complete.stl

CLAMP SLEEVE

CLAMP SLEEVE for the fishing chair, Easily print it in a horizontal orientation that why its a very strong thing one become. 
Print it 
Resolution 0.2 mm high layer 
Infill 20 %

Extended back for the FG-100 DDS Function Generator with space for a lipo and usb charger

a quick print to make your function generator untethered, below are links to the parts used

USB charging module:https://www.amazon.co.uk/gp/product/B08VWQYRXN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

lipo: https://www.amazon.co.uk/gp/product/B0953L98RK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Functional Signal Generator: https://www.amazon.co.uk/gp/product/B08NSR5GYR/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

Nashville SC Keychain

Nashville Soccer Club Keychain
1 hour and 2 minute print on 100 speed with an Ender 3

Nema 17 Fan House 4010 fan.stl

Nema 17 Stepper motor fan coolers! Direct the heat away and make efficient long lasting fan housings. 

FanHouseNEWTech.stl

Holder for Fire Blanket

fire-blanket-holder.stl

FLEXTAILGEAR to Klymit matress pad

inflator.stl

Gridfinity parametric FreeCAD file along with Blank Storage 3x2x3 .stl file

Gridfinity blank storage bin, 3x2 units wide/long, 3 units high, no screw holes in the magnet pockets in the base

Gridfinity-Blank Storage 3x2x3.stl

Sword Wall Mount

A quick-and-dirty wall mount for my ninja sword. Aside from wanting it to be strong, I also wanted it mostly hidden when looking at it. Admittedly, it could be a little slimmer, but it does the job.

**NOTES:**

Easy print. No supports if printed on its side. I used PETG for its longevity and strength. 

The Stack Overflow Keyboard RGB LED Riser

The Stack Overflow Keyboard as sold by Drop dot com includes two RGB LEDs on the underside of the PCB, but all light is blocked by a full aluminum enclosure. 

This part replaces the bottom cover, which will let light through and diffuse around the 2mm riser integrated into the new part - provided you use a translucent filament or resin. 

I printed mine with Giantarm clear PLA
0.24mm layer height
3  top layers
2 bottom layers
15% infill, pattern = "lines"
On an Ender3 V2

Hardware:
4x 6mm M2 screws
Or modify the model yourself to allow the original countersunk screws to fit. 
4x self-adhesive bumper pads or reuse the original feet that came with the macropad.

theKeyMacropad_2mm riser.stl

tic tac toe keychain

tic tac toe keychain, I printed mine at 100% and did a filament change at layer 21.


**printing settings**
scaling: 40%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: no


this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing 


USB Battery Case

This is an 8 slot Batter Case for they very common 5V USB Batteries you find in discount stores.  These batteries hold a good charge and are great for mobile sensors, charging phones, etc.  This holder allows you to store charged batteries ready for replacement at any time. 

Traxxas rustler 4x4 vxl wheelie bar attachment.stl

CANnon Cup Holder - Thangs Workspace Design Challenge

Blank_12oz_Can_Cup_RLY_V1.step

BeagleCam Stativhalter V2.stl

Version zwei. Grundplatte für Manfrotto-Stativ. Anstelle von Beaglecam-Standfuss.

Multifunction phone stand lamp

GAMER HEADSET HOOK HOLDER

GAMER HEADSET HOOK HOLDER FOR DESK STAND:

✅ Easy to install (use double-sided adhesive tape, not included).
✅ Store your headset elegantly on the wall or other smooth surface.
✅ Protect it from dirt, dust and clutter on a smooth base.
✅ Ideal material for printing: ABS or TPU (ABS is recommended as it is more resistant).
✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where you want to stick it. After being glued, it should be left to stand for 3 minutes for a good adhesion of the product.

APPROX. DIMENSIONS:

✅ Length: 10 cm
✅ Width: 4.6 cm
✅ Height: 6.3 cm

TERMS OF USE:

FOR WEB & PRINT:

- Personal Use is OK.
- For Commercial / Promotional use is OK but you must include:

The link to my profile "piazzestudio" of Thangs on any product pages online.

- If you sell this product personally you must put also the credit of the creator.

Copyright remains with me.

❌Do not claim this work as your own.

My designs are ideals for gifts, home decoration, events plans, partys, weddings, etc.

I hope you enjoy my Work.

---------------------------------------------------------

CONDICIONES DE USO:

PARA WEB ó IMRIMIR:

- Para uso personal está bien.
- Para uso comercial / promocional está bien, pero debes incluir:

El enlace a mi perfil "piazzestudio" de Thangs en cualquier página de productos en línea.

- Si vendes este producto personalmente también debes indicar los créditos adecuados.

Los derechos de autor permanecen conmigo.

❌No reclames este trabajo como tuyo.

Mis diseños son ideales para regalos, decoración del hogar, planificación de eventos, fiestas, bodas, adornos, etc.

Espero que disfrutes de mi trabajo.

output device

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lego Bust (Iron Man) Wall Mount

FHW:: Lightweight Webcam Mount

CLAMP SLEEVE

Extended back for the FG-100 DDS Function Generator with space for a lipo and usb charger

Nashville SC Keychain

View 14 new models

Holder for Fire Blanket

FLEXTAILGEAR to Klymit matress pad

Gridfinity parametric FreeCAD file along with Blank Storage 3x2x3 .stl file

Sword Wall Mount

The Stack Overflow Keyboard RGB LED Riser

tic tac toe keychain

USB Battery Case

Traxxas rustler 4x4 vxl wheelie bar attachment.stl

CANnon Cup Holder - Thangs Workspace Design Challenge

BeagleCam Stativhalter V2.stl

View 49 new models

GAMER HEADSET HOOK HOLDER

16mm Split Clamp

Box Car Racer - Ferrari F40 - A Sliding Dove Tail Box Remix