Takina Lycoris M&P 9 Pistol

Label '3D Printed'

Label '3D Printed'.stl

Spiral Vase Rose With modular Stem

PTFE Tube Clamp for Prusa MMU

Hardware
Socket Head Cap Screw M3x10
Hex Nut M3

Model is created in Soldiworks with multiple bodies to easily assign colors to the numbers.

PTFE Tube Clamp for Prusa MMu

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

Dinosaur Icon 0047, nestable box (v2)

3d-printer tom v1.3mf

Cable Holders

cable holder 6 mm.stl

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes  #ThangsBambuContest

SpinCycle_DefaultJar.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

3D Printable Extruded Layer Pot with embellished 3D printing layers

Fluffy Hearts LESS-THAN SIGN, nestable box (v3)

Art Spatula

Spatula.stl

Through-hole simple UFO pencil topper

Case - Fuente de Voltaje (PowerSupply)

HP LaserJet 100 color MFP M175 back door lock bracket

One time I open the back door and this part fell out. Then I lost the part.
Without this part, the back door can not close properly, and it will not print because it thinks the door is open.
Thankfully I have another identical printer, and I made a model of the bracket (for the left side). The printer works just fine now with this replacement part.

German Shepard Bic Buddy

Conductive Touch Lamp

Loonie for Locker or Carts

Simple 3D printed loonie that is good for locker (that gives you back the coin), and shopping carts

Alien head pencil topper

office supplies

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Takina Lycoris M&P 9 Pistol

Label '3D Printed'

Spiral Vase Rose With modular Stem

PTFE Tube Clamp for Prusa MMU

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

View 193 new models

3d-printer tom v1.3mf

Cable Holders

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes #ThangsBambuContest

ZigZag Christmas Ornament

3D Printable Extruded Layer Pot with embellished 3D printing layers

View 468 new models

Art Spatula

View 19 new models

Case - Fuente de Voltaje (PowerSupply)

HP LaserJet 100 color MFP M175 back door lock bracket

View 30 new models

View 12 new models

Loonie for Locker or Carts

View 16 new models