Gridfinity Bin for Bambu X1 Hotend Assemblies

bambu-nozzle-gridfinity-block v2.step

Nozzle cam bracket Ender 3 S1.stl

nozzle cam lid.stl

Printception Large Vase

large-vase.stl

Nozzel size plaque.blend

Nozzel size plaque.stl

Nozzle Holder Tube

Nozzle Holder Tube.stl

Dyson handheld vacuum nozzle

Dyson_Wide_Nozzle.stl

Milwaukee M18 Vac Nozzle

Need a smaller nozzle for your Milwaukee M18 vac? This nozzle will do the job. You can even attach an 8mm (5/16") OD tube to the tip to give you even more reach. 

Printception Square Container

square-dish.stl

Nozzle v4.stl

Just a container in the form of an nozzle.

Flexi Extruder Toy

Extruder Toy Nozzle.STL

Flexi-Nozzle

Flexi Nozzle nozzle (1).stl

HMG7 Slice Copperhead PC4-M10 Cap.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

5.5mm Nozzle Endoscope Mount for Bullseye

***Model originally uploaded to Thingiverse at*** https://www.thingiverse.com/thing:5828734

***Concept***
A 5.5mm endoscope mounting plate for the Petsfang Bullseye.


***Usage***
You will need to print:
- [1x] Endoscope mount

You will also need a M3x10 (or longer) screw and nut to keep the endoscope from slipping and rotating.


***Updates***
2023.02.01 - Initial release. **NEW:** 5.5mm nozzle endoscope Mount Bullseye Front v2

***History***
Had a go at making my own endoscope mount using the BLTouch mount on the side, but ended up giving up due to my endoscope constantly shifting in the PLA mount (it heats up with the LEDs enabled), so I moved it to the front using the Bullseye Insert plate template (thanks dpetel for Bullseye and panpankiss for blank template stl). 


***My Print Settings***
**Printer Brand:** Creality
**Printer:** Ender 3 Pro
**Rafts:** No
**Supports:** Print with flat side down. Supports are optional(?)
**Resolution:** 0.12
**Infill:** 15%
**Filament:** SUNLU PLA Black


E3D v6 (new version, cartridge thermistor) Silicone Cover

Nozzle ring box with secret compartment

box.stl

Gridfinity 7x Nozzle holder - E3d Nozzle Pro Pack.stl

This 2x1x3 piece can hold 7 v6 3d printer nozzles. The labels are ideal for the E3d Nozzle Pro Pack and one extra standard 0.4 mm brass nozzle, which is included with most printers by default. 

The model is heavily inspired by onelostcauses design: https://thangs.com/designer/onelostcause/3d-model/Gridfinity%20E3D%20V6%20Nozzle%20Fun%20Pack%20Holder.stl-62001

Gridfinity by Zack Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

Pocket Nozzle

This small nozzle easily fits in your pocket. Perfect for quick rinsing, washing or clean up. Nozzle creates short range pressure up to 3 meters (10 feet). Standard hose thread required.

_Have a suggestion on how to make this design even better? - Feel free to leave a comment. We will have a read through and see if we can incorporate your idea into the design. If we can we’ll update with a new version._

**License**
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

**Recommended Setting**
Printer Brand: FlashForge
Printer Model: Adventure 4
Print Software: Flash Print
Nozzle Size: 0.4mm
Material: PLA 1.75mm
Extruder Temperature: 205℃
Platform Temperature: 55℃
Layer Height: 0.08mm
First Layer Height: 0.20mm
Base Print Speed: 80mm/s
Shell Count: 2
Shell Print Order: from inner to outer
Infill Top Solid Layers: 12
Infill Bottom Solid Layers: 12
Fill Density: 15-20%
Fill Pattern: Hexagon
Supports: NONE
Raft: NONE

_Have suggestions on how to print this design even better? - Feel free to leave us comment. We will test on the latest version of this design and if it prints the same or better we’ll update this section._

**Post Printing**
Light sanding recommended.


**Additional Materials**
NONE

**Likes & Tipping**
Your likes and tips help us out so much. No obligations for either of course. Thank you so much for those that support our designs!


Circular Nozzle Holder

Drain Nozzle for LG Portable AC and Heater

This is meant to be an alternative to LG part number COV36133186 for the LP1021BHSM Portable AC/Heater (It may work with other units). This was designed to fit standard 3/8" ID clear tubing.

This is my first attempt at making a 3D model, but I was inspired to learn thanks to LG's official parts reseller charging $60.95 for a small piece of plastic and clear tubing. 

My Print Settings:
- Polymaker ASA
- 0.2mm layer height
- 99% infill
- Tree supports
- Randomized Z seam (helps create a better seal for the hose)
- Print time ~33 minutes

3D Printer Nozzle.stl

Here is a small replica of a nozzle used in 3D printers. There are no markings and it can be easily customized as required.

nozzle

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Bin for Bambu X1 Hotend Assemblies

Nozzle cam bracket Ender 3 S1.stl

View 78 new models

Nozzel size plaque.blend

Nozzle Holder Tube

View 20 new models

Milwaukee M18 Vac Nozzle

View 72 new models

Nozzle v4.stl

Flexi Extruder Toy

Flexi-Nozzle

View 510 new models

5.5mm Nozzle Endoscope Mount for Bullseye

View 25 new models

Nozzle ring box with secret compartment

Gridfinity 7x Nozzle holder - E3d Nozzle Pro Pack.stl

Pocket Nozzle

Circular Nozzle Holder

Drain Nozzle for LG Portable AC and Heater

3D Printer Nozzle.stl