dell latitude e6510 drive bracket.stl

MacStånd ~ A Laptop Stand

Laptop Stand-0.44 in gap (Macbook Air).STL

Remix of Double Laptop Dock

This is my first 3D printable product. I designed a double laptop dock to stand vertically. There are two sizes of slots, one can fit a standard 14" Macbook Pro, the other a slightly thicker laptop. You can also easily fit an iPad or other tablet in these slots. 
The stand also comes with a hand nook for storing desk essentials. 

Printed with PLA. 

Double Laptop Dock

laptop Stand

laptop+stand.stl

Laptop Stand

1022-1.1.stl

Green Office

Monitor Pflanzgefäß THE ONE.stl

Foldable Laptop Stand

Stand_Fold_V2_SIDE.stl

Multi Device Holder 

This is a stand to hopefully clear up all those random devices laying around. This stand can hold 4 devices, The biggest I can fit in it is an iPad pro with the magic keyboard case. But laptops such as MacBooks and Surface Pros can also fit in it (providing the fact that you don't have a case on it.) I just used command strips to keep it on my desk so that way it wouldn't move around. Hope this design suits your needs in an effort to tidy up!!!

FHW: Set size blank

this is the blank slackers..
Cheers
Maker

ZBook Docking Station

zbook_assembly.stl

Vertical Stand for M1/M2 Macbook Pro

Macbook_Pro_14-15inch_2021.stl

Infinity Mirror Stand (LED Light Up)

Show off your infinity Mirror in style!
This is a stand for an Infinity Mirror built with a 12x12" shadow box.  There are a ton of builds out there for Infinity Mirrors.  If you would like me to do one on how I made mine drop a request on the guestbook here https://withkoji.com/@MakersMashup/y82g

This uses silicone LED Neon strips (One on each side) and then hooks to a standard LED controller.  Here is one you can build yourself: https://thangs.com/designer/Makers%20Mashup/3d-model/ElectroCookie%20Enclosure%20for%20WLED%20Projects-760374?manualModelView=true&source=Recent


Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



Battery Bracket

90 degree bracket to hold the corner of a battery in place in the XY plane.

Headphone Rest - v3 (for Laptop, Notebook)

The goal of my design is to create some kind of rest or hook for a headphone / headset while you are working on your notebook/laptop.
My headphone was always laying arround and i wanted a cleaner desk.

The headphone rest have to be placed / double tape glued onto the backcover of the notebook/laptop.

The headphone rest can be slided out to hang on your headset to the hook and if you put your notebook/laptop in a bag for travel etc.. you can just simply slide the rest in.

The example pictures will show you where to place it and how to use it :)

If you like my design, i would appreciate it if you buy it to support me for my time to create it and make future designs possible.

Note: Double side tape - i used a 0.8mm thin double sided tape with a width of 30mm (which fits perfect for the design), you may use a 3M or a similar tape from amazon, aliexpress, local store etc.

Befor you glue it onto the notebook/laptop - make sure both have temperatures > 20°C and the spot where you tape it onto the notebook/laptop is free of dirt, dry and cleaned (like with isopropylalcohol ...) to get a nice bond. (Make sure you do not damage the backcover by the material used).

If you like the design, you can fill out the offset surfaces with a white/colored waterproof pencil to give it a highlight.


Print material: PETG (recommended)
Nozzle size: 0.4mm
Layer height: 0.16mm or 0.12mm works perfect. (maybe 0.2mm works too, but i have not tested it since the parts are small)
Print duration: 1 set (base + slider) was 42min on my Prusa MINI+

Postprocessing:
- Place the double sided tape on the back of the base
- Put a very very small dip of grease / oil onto the "inner rails" of the base
- Connect the slider into the base with a little force to "snap in"
- Try to move the slider from side to side, if it runs smooth all good, if not, maybe a little sanding/mechanical smoothing is needed.

Computer with camera and tilted screen 

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/023DLBTrwfO

1x2 Gridfinity Arduino Adapter Plate v18

1x2 Gridfinity Arduino Adapter Plate All v18.stl

Laptop Mockup

This is a futuristic laptop mockup for any project you would need this for. I work hard on these designs, so if you like my designs, a follow would be very helpful.

laptop

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

dell latitude e6510 drive bracket.stl

MacStånd ~ A Laptop Stand

Remix of Double Laptop Dock

laptop Stand

Double Laptop Dock

View 44 new models

Green Office

Foldable Laptop Stand

Multi Device Holder

FHW: Set size blank

ZBook Docking Station

Vertical Stand for M1/M2 Macbook Pro

View 10 new models

Battery Bracket

Headphone Rest - v3 (for Laptop, Notebook)

Computer with camera and tilted screen

1x2 Gridfinity Arduino Adapter Plate v18

Laptop Mockup

Credit Card Tray

Easythreed_X1_1kg_Spool_Holder_v2.1.stl