Cookie Cutter

electric seat button for BMW e39

I made this part to hook on the little white knob to move the seat.

I printed it with the arrows showing on top. 0.5mm extruder, 1h print time. supports on.


Frogg Symbol

This is a relief scan of a bone frog symbol.

Jaw Strecher

Tope can base.stl

Fabulous Fulffy

The arms for the robot do need special supports so I will upload that on this when I finish it.
I hope you like it.

Comment anything that needs fixed and I will fix it.

Also check out the other one. It will probably work better

Ahorn Camp AC Camper Keychain Schlüsselanhänger Maple Leaf

Dingding halloween

decided to make some funny remixes and added a robot eye and some metal sheets and I actually printed the cyborg in .16 I think for higher detail 

Dingding Cyborg

Computer with camera and tilted screen 

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/023DLBTrwfO

Truck for Board Game

This is a miniature truck meant to be a player piece on a Monopoly-style board game. Total length is 30mm.

Initially I tried scaling down an existing model (see model this is remixed from) but was having trouble with lines becoming thinner than my extruder width. So I remodelled this from scratch, using the original design as a template but modifying all walls to be multiples of 0.4mm and any vertical features to be multiples of 0.2mm. I didn't spend a lot of time perfecting things like the grill, as when this is printed this small, I don't notice a huge difference. Note this is now a single piece and has no moving parts.

This was designed to be printed on an FDM printer with a 0.4mm nozzle with a 0.2mm layer height. A smaller nozzle or shorter layer height should work fine, but if you go bigger for either I am not sure it will print cleanly.

Note: Model shows in Thingiverse on its side but is intended to be printed wheels down.

JW - DIE BIBEL - Neue-Welt-Übersetzung

JW - DIE BIBEL - Neue-Welt-Übersetzung
JW German Bible

skull(2)

gingerbread_man

Mareep

Ginger

Stewart Platform Model

Stewart_Platform_Base.stl

Timemore slim plus stand

Stand for Timemore slim plus.
Print Settings
Printer brand:

Wanhao
Printer:

Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15%
Filament brand:

Doesn´t matter
Filament material:

PLA
Standards

NGSSCCSS

Breathing Keychain

Summary

Inspired by the Box Breathing Keychain by Minakousagi (thing:5280558), I designed a keychain for a breathing exercise I often practice with my patients. As I work in Germany, I used the german words "einatmen" for inhale and "ausatmen" for exhale.

The little knobs on the side are for counting while breathing:
inhale 1 - 2
pause 1
exhale 1 - 2 - 3 - 4
pause 1
Print Settings
Printer brand:

Prusa
Printer:

i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
-
Infill:
20
Filament brand:

-
Filament color:

-
Filament material:

PLA
Notes:

-
Standards

Yet another fidget cube

Subaru Oil Filter Wrench

Crossed tori

Decor element from crossed tori, art object.

Suitable for interior decoration inside and outside.

Dimensions can be changed in the slicer.
Standards

NGSSCCSS

Pegstr - Glue Bin

Customized version of https://www.thingiverse.com/thing:537516

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=537516
Instructions

Using the following options:

holder_x_size = 150
holder_y_size = 70
holder_height = 45
wall_thickness = 2.4
holder_x_count = 1
holder_y_count = 1
corner_radius = 5
taper_ratio = 1.0
holder_offset = 0.0
strength_factor = 1
closed_bottom = 1
holder_cutout_side = 0.0
holder_angle = 0.0


ASL_Test_Cube

This cube is a 2cm print test that allows you to test your printer against a range of materials. This was originally developed as a replacement for other tests as it had features more useful for testing the line up between augmented reality and 3d printing materials and techniques.

It has a ramp on the top of testing the effect of print layers, an overhang inside for testing - well - overhangs and some embossing and relief details.

I've found it very useful and more pocketable than other test pieces.


ASL_Filament_Feed_Prusa_Mk3s_V2.stl

This is a filament guide. It clips onto the Prusa mk3 rail under the print spool and helps reduce jumping of the filament and adds a bit of friction reducing jarring.

ASL_Revised_Filament_Clip.stl

This is a simple filament clip. It clips the filament to the side of the reel. takes no time to print and is very convenient. 

Token Correct-Wrong

A token for boardgames with cards that can be ready/exhausted or correct/iwrong
Print Settings
Printer brand:

Creality
Printer:

Ender 3
Supports:
No
Resolution:
0.2mm
Infill:
10
Standards

paper towel rack

towel_main.stl

My Customized Parametric Hinge

Customized version of https://www.thingiverse.com/thing:2187167

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167


My Customized door hook hanger

Customized version of https://www.thingiverse.com/thing:102974

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=102974


Thing ico Schlüssel für Batterie Hauptschalter Key for Battery Main Switch

My Customized Parametric Pipe Clamp

Customized version of https://www.thingiverse.com/thing:16807

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=16807


XFG ble outer barrel removal kit

xfg_outer_replacement.stl

Xgimi Halo Cover

On the top there is now a small hole to see the status LED and a big hole to save material.

On the back all connectors are accessible but the power button is still covered.

The sides are modified and can be used as floor stand to do ceiling projections.


sloopV3 gps SMA dji air unit 

antenna with gps matek print for the sloopV3

Mini electromagnet for fischertechnik

P10x10_E-Magnet_Bundhülsen_v4-_top.stl

Phone Stand

this a phone stand that I designed to put on my desk and make a louder sound when I play music.

Square planter

upper.STL

Nerf Dart Holder

A simple holder for standard Nerf darts. 

Drill Holes - Metric

A handy guide so you don't drill your holes all wonky. Comes with a neat little notch at the bottom for drilling into corners or cylinders.
Sizes: 10, 9, 8, 7, 6, 5, 4 cm

Drill Holes - Inch

A handy guide so you don't drill your holes all wonky. Comes with a neat little notch at the bottom for drilling into corners or cylinders.
Sizes: 1/2, 7/16, 3/8, 5/16, 1/4, 3/16, 1/8 inch

PollyBurger

Achievements

Seedling

Fan Favorite