Tall Lamp Base for 6cm LED light 

001 light for lamp, tall.stl_1.stl

Crinkle lamp base for clip-in accessory bulb

Crinkle lamp base.STL

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

a-frame-cabin.stl

SP00L Lamp

Spool is a 3d printable lamp design that gives new life to filament spools.

Those of us who print know what it's like to have spent spools lying around not knowing what to do with them, plus they are difficult to recycle. That's why I created this design that ingeniously plays with the spools to make the most of them.

If you give a lot of support to the design I will create a line of lamps with the same concept of reusing spools!

To assemble it you only have to print 4 times the same piece (SPOOL.stl), I recommend printing them 2 by 2. The next step would be to glue or solder two pieces so that you have two half-cylinders with the bases at the ends. These halves are attached to two spools, one at the top where the socket with the bulb will be attached, and another at the bottom. Finally, the two halves are tied together with string or you can even use filament scraps.

You can play with the combination of different types and colors of spools that you have: dark or transparent, plastic or cardboard... I used the dark spools from 3DJake and the transparent ones from Sakata 3D.

The outer diameter of the lamp is 22.5 cm, I left a margin so you can assemble it with coils of different brands of 1kg. You can even scale the design so that you can mount a smaller version with smaller spools!

For more clarification you can check my Instagram where I will be posting more information about the project:
https://www.instagram.com/creaserra


3D PRINTING SETTINGS
For the model (SPOOL.stl) it should be printed using transparent PLA (I used from 3DJake) in the optimal orientation (big base down) and using the following parameters:

Infill: 0%
No Support
No adhesion
Layer height: 0.3 mm
Top layers 4
Bottom layers 4
Wall line count: 3
Nozzle size: 0.4 mm
Line width: 0.4 mm
Nozzle temperature: 210ºC
Retraction: Yes

Spool Lamp

Lamp Shade - Raw Filament 

Lamp Shade Raw Filament Rib.3mf

SAKUMI | Table Lamp E14 & E26/27

SAKUMI_table-lamp_V1_Shade-E14.stl

Short Lamp Base for 6cm LED Puck 

001 light for lamp, short.stl_2.stl

Wave Lamp Top 

Wave Lamp Top.stl

Ackja Lamp Shade

Ackja Lamp Shade.3mf

Mini Lamp F020 by UMINO

MF020BASE.stl

Mini Lamp 002 by UMINO

M002CAP.stl

Watch Tower - The Modern Bedside Lamp

Modern Bedside Lamp - Watchtower.3mf

Flame Lamp

Flama-Vr3 (1).stl

Strala Column Base

Strala Column Base.3mf

Lutron Pico remote Holder

This is a holder for the Lutron Pico Remote. Holds a single remote. Example pic is for the remote that controls automated Lutron shades.

home furnishings

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tall Lamp Base for 6cm LED light

Crinkle lamp base for clip-in accessory bulb

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

SP00L Lamp

Lamp Shade - Raw Filament

SAKUMI | Table Lamp E14 & E26/27

Short Lamp Base for 6cm LED Puck

Wave Lamp Top

Ackja Lamp Shade

Mini Lamp F020 by UMINO

Mini Lamp 002 by UMINO

Watch Tower - The Modern Bedside Lamp

Flame Lamp

Strala Column Base

Lutron Pico remote Holder

Overlook Hotel Carpet Retro Coaster

Ripple Panel Lamp

Poly-Lamp Shade V5

Lönna - Small Table/Bedside Lamp

Luminus Bloom: Elegant Lamp with Radiant Glow